LT5 short block

[ZRXMAX]

.................................................. .................................................. .............Sold................................. .................................................. .................................................. ....


2 bolt 1991 LT5 short block with oil pump and oil pan included. This car had 28028 miles on it at the time it became inoperable. A small fire ( probably the drivers side cat ) damaged a sigificant amount of wiring. Price dropped to $2000 and you take care of the freight if it isn't a local pickup.

Pictures on request.
zrxmax@aol.com

[POWERBRAKEBOB]

I MIGHT be interested. Mine has 250,000 miles on it.

[ZRXMAX]

I MIGHT be interested. Mine has 250,000 miles on it.

I can appreciate that because I only have a 121K on mine. At the rate my miles are increasing its unlikely I will need one in this decade.

Just noticed you are local to me. Their must be a story behind your screen name !

[ZRXMAX]

Bump

[ZRXMAX]

Bump

[ZRXMAX]

Xmas Bump :)

[ZRXMAX]

^^^

[ZRXMAX]

Price drop, 2k plus shipping.

[Blownrunner]

Ever watch Top Gear? That would make a cool coffee table.

[ZRXMAX]

Ever watch Top Gear? That would make a cool coffee table.

Don't let me get in the way! Get that check in the mail! ;)

[ZRXMAX]

Bump

[ZRXMAX]

Bumpty bump...

[SAM/CH ZR-1]

Still available?

Sam

[ZRXMAX]

Still available?

Sam

Yes... still availible

[ZRXMAX]

^^^

[ZRXMAX]

^^^

[Dynomite]

How do the Cylinder walls look?
I got everything else on this engine from you :D
Guess I should just come on down and pick it up :sign10:
How does the other end look (the flywheel end)?
I am trying to figure out exactly what would make a complete engine and I think I have everything required :p

[ZRXMAX]

PM sent

[Dynomite]

I am assuming missing.......and associated bolts for ALL missing parts?

Flywheel
Front Plate and camshaft chains/sprockets
Chain guides and facings
Oil Filter Housing
Bell Housing
Pressure Plate and associated clutch components
Injector housings
Heads
All the secondary components
HVAC and Purge vacuum components
Plenum
Ignition Module
Coils and associated coil platform
Starter
Harmonic Balancer
Tensioners

I have to study the photos some more :D

Do you have any of the original missing parts listed or associated bolts?

http://i287.photobucket.com/albums/ll142/dynomite007/Dynomite8/688f5d00-d4a5-434b-b4dc-f925ec5d825c.jpg
http://i287.photobucket.com/albums/ll142/dynomite007/Dynomite8/7029528d-9f9b-4480-a54e-b9e818530e53.jpg
http://i287.photobucket.com/albums/ll142/dynomite007/Dynomite8/a93dea7f-8c34-4e10-aebd-41f12aad17d6.jpg
http://i287.photobucket.com/albums/ll142/dynomite007/Dynomite8/c6520d97-7ae0-4903-991b-eac2fed8142c.jpg
http://i287.photobucket.com/albums/ll142/dynomite007/Dynomite8/4eb8831e-dcfc-495e-bbed-77361e9c939b.jpg

[ZRXMAX]

Some parts were damaged in the fire such as the ignition control module under the plenum.

I still have many of the "good" parts and will re-inventory them for an accurate record.

The heads you bought from me were from this motor and I have the 20 headbolts in proper protective storage.

Off the top of my head... I have the following.
Flywheel
Clutch disk and pressure plate
Bellhousing
Camshaft plates and chains
Chain guides and tensioners
Harmonic balancer
Idler sprocket for cam chains
Primary chain, ie, crankshaft to cam chain idler sprocket.

No coil packs
No coil pack platform
The starter is questionable.
No injector housings or plenum

[ZRXMAX]

I sent you a couple of pictures of engine parts to your e mail address.

Most, if not all parts come with the bolts that fastem them.

Bell housing, dual mass, and the pressure plate are also here.