Gathering pictures???

[Paul Workman]

WELLLLLLL!? The best/most pix of the gathering were taken by a base mo C4 guy on the CF forum. What up wid dat?? Y'all musta been havin too much fun or cavortin' with the "autocross pixies"? So whar are da pix???:dancing

Paul (bummed I couldn't go and hoping to live the experience vicariously?:()

[Fully Vetted]

We have so many pics it's taking us a lot more time to get them loaded! George said he'll be loading all his pics on his website (http://zrwon.com/) but it may take a couple of days.

[Gunny]

We have so many pics it's taking us a lot more time to get them loaded! George said he'll be loading all his pics on his website (http://zrwon.com/) but it may take a couple of days.


I have several hundred pics & videos that I'm processing as we speak. It was almost 7pm when I got home last night, totally bushed from dealing with the weather/crazy drivers. I'm leaving in a few minutes for a doctor's visit :rolleyes: and then have to go to South Carolina to perform a concert this evening. If the eyes can stay open I'll be working on the pics later this evening as well as tomorrow morning ... all pics have to be processed into web pages and then uploaded. I'll post the direct link as soon as they are ready, but all the pics will be in a folder on zrwon.com. Sorry I'm not faster but I really need to invent a clock stretcher :mrgreen:

If all goes as planned the pics should be up sometime tomorrow. Thanks for your patience.

[JimZRyd]

Hey George, Where about in SC are you headed? If you are near me (Florence) give me a buzz and I'll take you out for a bite!

Jim 843-621-0543

[Gunny]

Playing a concert in Aiken (Hopeland Gardens) tonight @ 7
Going to St. George tomorrow afternoon late for a funeral visitation ... I'm using the southern route & crossing the river below Allendale ... quick over & back.
We'll have to get together on another trip ... promise.

George

[JimZRyd]

Sounds good 👍

Jim:fahne:

[LancePearson]

Paul,
I saw these 1/2 mile results from wannagofast the last two 1/2 mile meets they had....April, 2013 and fall 2012. Good luck...sorry for hijacking but needed a place to attach them so you could see them if you haven't already. Pretty diverse group of cars ran the last two...the ZO6's did not do that well in my view.....

Lance Pearson

[LancePearson]

where are they?

[gunman0]

Here are some of my pictures. I'll transfer the rest left in my camera to the same gallery tonight.

https://www.dropbox.com/sh/auh4kkvvtuep1g6/28yNWMBg4g

[LGAFF]

Who has the GTO setup, was this a ZR-1?

https://photos-5.dropbox.com/t/0/AABhhYbX1eY2WcFoamh3qFIB-f6SwRsbxuC803G_RaDsaA/12/22551502/jpeg/32x32/3/1369094400/0/2/DSC_0326.JPG/BBdlPcMI3r0PSX168ZoAR22fcAk0jRTlbXg_oa8k-nk%2CBeCzQirWEWO15DyiMJ1u0dUO3hpAOaEr7nB-b3KWh44?size=1024x768

[Daniel_Mc]

Who has the GTO setup, was this a ZR-1?

https://photos-5.dropbox.com/t/0/AABhhYbX1eY2WcFoamh3qFIB-f6SwRsbxuC803G_RaDsaA/12/22551502/jpeg/32x32/3/1369094400/0/2/DSC_0326.JPG/BBdlPcMI3r0PSX168ZoAR22fcAk0jRTlbXg_oa8k-nk%2CBeCzQirWEWO15DyiMJ1u0dUO3hpAOaEr7nB-b3KWh44?size=1024x768

That's Tony's ZR-1 he custom made the part.

-Daniel

[LGAFF]

Needs to be a featured car here, looks good

[Daniel_Mc]

Needs to be a featured car here, looks good

You are so right! Lots of cool stuff done on that Z and all work done by the owner.

-Daniel

[Tony Davila]

Who has the GTO setup, was this a ZR-1?

https://photos-5.dropbox.com/t/0/AABhhYbX1eY2WcFoamh3qFIB-f6SwRsbxuC803G_RaDsaA/12/22551502/jpeg/32x32/3/1369094400/0/2/DSC_0326.JPG/BBdlPcMI3r0PSX168ZoAR22fcAk0jRTlbXg_oa8k-nk%2CBeCzQirWEWO15DyiMJ1u0dUO3hpAOaEr7nB-b3KWh44?size=1024x768

Lee, it belongs to me.

[Fully Vetted]

Yeah, Tony's done some real special things to that car. Love your dual catch can setup, brother. One nasty ZR-1.

[boostedmaxPSI]

Completely agree. Tony has some really trick items.

https://lh5.googleusercontent.com/-TZBXBWVXP8U/UZTUFP7VZWI/AAAAAAAAAzA/SPPANUNhG5I/w696-h522-no/20130515_183540.jpg

[Kevin]

looks like a good time was had by all and I can't wait for more pics

[boostedmaxPSI]

Evidence of some serious driving or better yet, serious stopping from certain speeds on our road trip from Texas.

https://lh6.googleusercontent.com/-q7ipdP5CKs8/UZTSxDaOsLI/AAAAAAAAAwM/6yA_dsC2_NA/w696-h522-no/20130515_114148.jpg

[Bob Eyres]

Completely agree. Tony has some really trick items.

https://lh5.googleusercontent.com/-TZBXBWVXP8U/UZTUFP7VZWI/AAAAAAAAAzA/SPPANUNhG5I/w696-h522-no/20130515_183540.jpg

Whatzat?

[Tony Davila]

Whatzat?

GTO louvers, painted inner fenders and black 90 wheels. Is that what your asking?:???: Sorry not meant to be a smarty pants.

[Blue Flame Restorations]

GTO louvers, painted inner fenders and black 90 wheels. Is that what your asking?:???: Sorry not meant to be a smarty pants.


Tony, your car is the BOMB!!! I remember seeing it last year and speaking with you about it. We didn't seem to meet up much this year.

Still love your taste. =D>

[Tony Davila]

Tony, your car is the BOMB!!! I remember seeing it last year and speaking with you about it. We didn't seem to meet up much this year.

Still love your taste. =D>

Thanks Brett.;) I have so much custom stuff on my Z that I need to show you guys. I have installed water/meth, custom built two oil catch cans that are hidden and work awesome. I will do a full write up on the catch cans, I don't know how anybody could drive there Z with out them.
http://i69.photobucket.com/albums/i66/Zrace1/IMAG0455_zpsa24778b7.jpg
Under construction oil catch cans. (below)
http://i69.photobucket.com/albums/i66/Zrace1/IMAG0410_zps44c0838f.jpg
http://i69.photobucket.com/albums/i66/Zrace1/IMAG0408_zps84560822.jpg

[LancePearson]

I put stainless steel mesh in the gills of my 76 and it really gave it a finished look. Have not done anything like that to my 91 Z as the gill didn't seem like it would be that visible. The photo above sure makes it so though.

Lance

[scottfab]

Completely agree. Tony has some really trick items.

https://lh5.googleusercontent.com/-TZBXBWVXP8U/UZTUFP7VZWI/AAAAAAAAAzA/SPPANUNhG5I/w696-h522-no/20130515_183540.jpg

How were these wheels done? Powder coat? I really like them.

[Bob Eyres]

Whatzat? I meant the unit just behind the inner fender well. My 91' only has a heater blower motor there.

BTW, pretty slick car. You've obviously spent a lot of time on it.
It's funny how all these cars seem to have their own personality. My stock white 91' doesn't look like it came off the same assembly line as that mean mother :eek:

I'd really like to see it some day.

[-=Jeff=-]

Whatzat? I meant the unit just behind the inner fender well. My 91' only has a heater blower motor there.

BTW, pretty slick car. You've obviously spent a lot of time on it.
It's funny how all these cars seem to have their own personality. My stock white 91' doesn't look like it came off the same assembly line as that mean mother :eek:

I'd really like to see it some day.

That square box with wiring?

That is the Knock Control module.. it moved to inside the ECM in 1991 on the ZR-1 and 1990 for the L98..


tony we need more pictures of your car.. What scoop/hood is that you have?

[tf95ZR1]

http://i529.photobucket.com/albums/dd335/tf95ZR-1/BGa513_zps8671435d.jpg

http://i529.photobucket.com/albums/dd335/tf95ZR-1/BG513_zpsda9287c0.jpg

[Schrade]

How were these wheels done? Powder coat? I really like them.

I told Tony at the Gathering I liked the Active Suspension wheels the BEST - and he's got 'em!!!


http://i160.photobucket.com/albums/t199/pennstatefootball/Corvette_ZR_1_Active_Show_1990.jpg

[Tony Davila]

How were these wheels done? Powder coat? I really like them.

Rattle can VHT semi gloss black paint that is designed for wheels and then added the red pen stripe. They turned out nice and have been very durable. Sorry don't mean to jack thread I will start a new project thread that covers it in detail.
http://i69.photobucket.com/albums/i66/Zrace1/IMAG0463_zps5e8bdd59.jpg
http://i69.photobucket.com/albums/i66/Zrace1/IMAG0467_zps8932c36b.jpg

[tf95ZR1]

Are those Active Suspension wheels or Salad Shooters?
I know there are also Saw Blade styles as well as A Molds.

[Kevin]

i wish they used the active hood on the zr-1.

[Schrade]

i wish they used the active hood on the zr-1.

+1

+ the WHOLE front clip, with the brake ducts, and the Formula 400 inverted scoops!!!

If my '90 had the '90 body, instead of the '91-'95, I would have fabbed that. It wouldn't go right on the later front clip tho'....................

[Tony Davila]

Are those Active Suspension wheels or Salad Shooters?
I know there are also Saw Blade styles as well as A Molds.
They are 1990 Factory wheels.

[tf95ZR1]

They are 1990 Factory wheels.

I know, but I thought they were called "salad shooters"

Bueler?

[Schrade]

WELLLLLLL!? The best/most pix of the gathering were taken by a base mo C4 guy on the CF forum. What up wid dat?? Y'all musta been havin too much fun or cavortin' with the "autocross pixies"? So whar are da pix???:dancing

Paul (bummed I couldn't go and hoping to live the experience vicariously?:()

Well there Mr. W, here's a few odd snappics ...

Couple of strays @ NCM:

https://lh5.googleusercontent.com/-6P5sbFET3f8/UZ0_ADcDRxI/AAAAAAAABT8/goelKBURRV4/s1280/HPIM6516.JPG

Some of the crew members gettin' a grub-on @ Rafferty's house of beef on Thursday (and it was GOOD!

https://lh4.googleusercontent.com/-a1doOpHIiCY/UZ0_mBdyrfI/AAAAAAAABUI/8wBprNpkDw0/s1280/HPIM6525.JPG

https://lh4.googleusercontent.com/-Sy_3c4GCcD4/UZ1AEKGu-TI/AAAAAAAABUY/gUdQbyyZKnY/s1280/HPIM6526.JPG

[Schrade]

WELLLLLLL!? The best/most pix of the gathering were taken by a base mo C4 guy on the CF forum. What up wid dat?? Y'all musta been havin too much fun or cavortin' with the "autocross pixies"? So whar are da pix???:dancing

Paul (bummed I couldn't go and hoping to live the experience vicariously?:()

... and @ NCM - couple on my 'wish' list:

https://lh5.googleusercontent.com/-QqqIn4HJO0c/UZ1E_5wgzBI/AAAAAAAABU4/Ln3nTz-xN2c/s1280/HPIM6517.JPG

https://lh6.googleusercontent.com/-oqCYaOyxKhE/UZ1FuCW8tMI/AAAAAAAABVI/IFZJupQSZ7A/s1280/HPIM6518.JPG

https://lh3.googleusercontent.com/-fOhuHjxf41U/UZ1GSTeYzdI/AAAAAAAABVU/WBe9c-h1h88/s1280/HPIM6519.JPG

https://lh5.googleusercontent.com/-m64U_2aJVjU/UZ1GxAmbUhI/AAAAAAAABVs/5h_6Xk3xokM/s1280/HPIM6520.JPG

[Schrade]

https://lh3.googleusercontent.com/-hnJfEt903gk/UZ1HhAgtegI/AAAAAAAABWE/Le11GChneY8/s1280/HPIM6521.JPG

and this shiny twister!!! (NICE LEGS - WONDER WHO THEY COULD BELONG TO? ANY IDEA MR. D??? :p )


https://lh5.googleusercontent.com/-belSLMiG7Qk/UZ1It2bkAfI/AAAAAAAABWU/nF9rIWoGKEs/s1280/HPIM6527.JPG

and where's the prop with the 21 pitch screw behind the Bronze machine here???

https://lh6.googleusercontent.com/-9YoQO3ybpxg/UZ1JJWw_6LI/AAAAAAAABWo/EUZF6bhwJ2M/s1280/HPIM6522.JPG

and someone's Z gettin' the Adams treatment @ NCM?

https://lh5.googleusercontent.com/-pOvVSd3YYqU/UZ1LZTlC07I/AAAAAAAABXQ/y5w9ze7wBGk/s1280/HPIM6524.JPG

[Tony Davila]

and this shiny twister!!! (NICE LEGS - WONDER WHO THEY COULD BELONG TO? ANY IDEA MR. D??? :p )


https://lh5.googleusercontent.com/-belSLMiG7Qk/UZ1It2bkAfI/AAAAAAAABWU/nF9rIWoGKEs/s1280/HPIM6527.JPG



Them B my Hulk legs.:-D
Thanks Chuck for the photos.

[Tony Davila]

I know, but I thought they were called "salad shooters"

Bueler?
Sorry I don't know, I heard them called that but don't know which ones they were referring to. 90 or 91 wheels.

[-=Jeff=-]

Salad shooters 88-90 wheels

91-96 Sawblades

[DaveK]

That was my black car "getting the Adams treatment". Thanks to everyone involved, they did a great job. Never thought I'd see my car in the NCM lol

Dave

[Bob Eyres]

i wish they used the active hood on the zr-1.

I second the motion. The ZR-1 didn't need extra paint and emblems, but that hood would have gone a long way to giving it a more distinctive look. That sexy bulge would have avoided the annoying scratches caused by the LT5 banging on the underside of my "normal" hood. It's a no brainer.

[Gunny]

More Photos HERE (http://www.zr1.net/forum/showthread.php?p=174083&posted=1#post174083)