Clutch slave

[laboss3]

Hi does anyone know who sells a steel clutch slave cylinder replacement. All I can find is the cast model I would rather have the steel one and not the cast one. Or possibly a rebuild kit would do also. It's for a 1990 zr1.

Any help would be appreciated

Bob

[LGAFF]

http://powertorquesystems.com/

[scottfab]

http://www.rockauto.com/catalog/moreinfo.php?pk=908272&cc=1041275

and also

http://www.rockauto.com/catalog/moreinfo.php?pk=1382431&cc=1041275

[laboss3]

Thanks guys I have a call into zf doc if he can't help I will try Powertorque Systems. I tried rock auto but they didn't know what they had cast or steel didn't get a warm feeling. Too bad I have used them in the past but the tech couldn't take a look to see what he had in stock.

Bob

[efnfast]

http://powertorquesystems.com/

2nd'd

[scottfab]

Thanks guys I have a call into zf doc if he can't help I will try Powertorque Systems. I tried rock auto but they didn't know what they had cast or steel didn't get a warm feeling. Too bad I have used them in the past but the tech couldn't take a look to see what he had in stock.

Bob


Rockauto has both cast and steel. They list about 6 or 8 that fit the 90.
The links I sent are the two steel ones going by the pics. The others were obviously cast going by the pics.
When I replaced mine I used a cast part.

[vettn71]

Jim at PowerTorque rebuilt my master and slave. Only way to go, as many of the new units may be misassembled. I had the cast units in my Z while I waited to get the originals rebuilt and they just don't feel the same. Call Jim. He's a great guy to work with

Jim

[laboss3]

Made contact with Jim at power torque systems and am buying one from him. Thanks for all the info and help.

Bob

[Schrade]

If you don't close there, I have all the hardware from my '90 ZF after doin' the auto conversion; 'Doug' has 1st dibbs on the tranny - if you're interested, I can get up with him to see what other parts he might want... (hardware has 32k on it).............

[POWERBRAKEBOB]

I'm pulling mine out to fix the leak. I used to be a Girling Distributor, and had new ones years ago. When I take it apart, I will see if I have the seal kit needed. I have built tens of thousands of power brake units. Many seals will interchange on cylinders. IF I figure out the seal kit, will there be anyone interested in ordering? you can see my videos at youtube.com/powerbrakeservice

[laboss3]

Please let me know what you find.

[laboss3]

Shout out and 2 thumbs up for Jim Jandik at Power Torque Systems a quality guy that sells a quality product with super chevy fast service.:-D Thanks again Jim.=D>

[Daniel_Mc]

Shout out and 2 thumbs up for Jim Jandik at Power Torque Systems a quality guy that sells a quality product with super chevy fast service.:-D Thanks again Jim.=D>

I'm with this guy Jim is great to do business with. Turn around is quick also.

-Daniel

[Gunny]

Made contact with Jim at power torque systems and am buying one from him .....

:thumbsup: