Any INTEREST in Other GROUP BUYS???

[guinnessdood]

What ideas do y'all have for additional group purchases? Let's put some thought into this thread and save some $$$!

Things like...
1.) Samco Air Duct - I know we can do this for ~$130 (new list price is $175)
2.) Spark Plug Wires - you tell me the brand and so on
3.) 160 deg Thermostat - I think $125 is WAY TOO much for a thermostat
4.) Short Shifter - Hurst
5.) C5 Brakes (or other brakes)
6.) Accel injectors - the new ones that work for us - with the correct O-rings (less than 1/2 the price of the best injectors (RC))...but still MUCH better than our stock injectors.
7.) Your idea here...

[guinnessdood]

How about 4.10 Dana Super 44 gear sets??? (or other ratios) along with the speedo correction gears.

C4 Beam Plates?

Coil Overs? (I know...pricey mod)

[FU]

R/D radiator :-D

[guinnessdood]

R/D radiator :-D
I started this thread three times before it stuck...One time when I typed the post..it included the Ron Davis Radiator. I agree...let's try to do a Group Buy on them.

I think this will be in the $400-500 range...but the benefits are significant. The stock radiator is dismal and made quite cheaply...too cheap for an LT5 for sure. I will look into the Ron Davis Group Buy. I have the e-mail address for Doug Schulz (General Manager for Ron Davis Radiators)...and will inquire about a Group Purchase price for us.

Uly

[ZR-1Mikko]

Uly,

I'm down for the coils as long as we can find a place or someone to put them on?
I also need those plug wires...how about MSD and why not a new thermostat and injectors....and the list goes on:)

[guinnessdood]

Uly,

I'm down for the coils as long as we can find a place or someone to put them on?
I also need those plug wires...how about MSD and why not a new thermostat and injectors....and the list goes on:)

It all sounds good...We just need to approach things one at a time...unless someone else wants to do some leg work. I think the Ron Davis Radiator is the #1 priority ...at least for my car....that and better driving capabilities! Mikko...maybe you could give me a lesson! :-)

[Peaven]

Good ideas Uly, thanks for driving this....beam plates seem like a good one, inexpensive and a must for most Z owners I think. Plug wires also sound good, I think the MSD wires are fairly popular.

Hell, I'm interested in about all of 'em...but since wife and I are in the process of international adoption right now, all spare pennies are going to that right now so I may have to wait a while:cheers:

[guinnessdood]

Good ideas Uly, thanks for driving this....beam plates seem like a good one, inexpensive and a must for most Z owners I think. Plug wires also sound good, I think the MSD wires are fairly popular.

Hell, I'm interested in about all of 'em...but since wife and I are in the process of international adoption right now, all spare pennies are going to that right now so I may have to wait a while:cheers:

No worries...let's just throw up some ideas...but not literally... LoL

[ZR-1Mikko]

Uly,

So i guess we are going to take our cars apart at the same time. I need to hurry up and to start collect some new parts to go under the plenum:-D

[Jeffvette]

4.125 stroker cranks for 1,000 bucks?




Couldn't resist.

[ZR-1Mikko]

Yeah!! Good one Jeff=D>

I think the biggest mod it is going to see is going to be just the MSD wires...

[guinnessdood]

4.125 stroker cranks for 1,000 bucks?




Couldn't resist.

I think with enough orders we could get them for 995. :-)

[tomtom72]

Just a thought about plug wires...in the mind set of "I don't have velco on my plenum"...type people....like me!:o

If you look on ebay there is a speed shop on Long Island, NY that sells excess stock(?) I guess. Anyway I bought a set of Magncore 85KV's, LT5 specific for about $140.00 w/shipping. At Magncore's web site the wires were over $200.00 + shipping.

I bought them when I did my injectors, CCV box, 2* actuator system, et al. My reasoning was go once & do it all. I know no powder coat & P n P, so I have to go again!:cry:

I can look up the bill for specifics if anyone might be interested...just a thought.:mrgreen:

:cheers:
Tom

[guinnessdood]

Any interest in other group buys? I'm working a Radiator Group buy with DRM. Any other ideas? C'mon...speak up..don't be bashful (yeah right!)

[Zr1 Destroyer]

4.125 stroker cranks for 1,000 bucks?




Couldn't resist.You're such a funny guy:rolleyes: , the truth is you could get um for around 3k a piece if enough were to be ordered at once but no body wants to make the crank brokers mad do they.[-X


Also couldn't resist...

[Ccmano]

Here's my vote in no particular order...(obviously, these are the items I need);)

4.10 Gears
Headers
Injectors
Beam plates
Stainless Brake lines

Hans

[frank12]

Any interest in other group buys? I'm working a Radiator Group buy with DRM. Any other ideas? C'mon...speak up..don't be bashful (yeah right!)
Windshield ?
around $500 then it is a C4 windshield.
around $2000 then it is a ZR-1 windshield.

[RHR ZR1]

I am new on this site so I probably did not post this in the correct place but my question is what the value is for a 1995 ZR1 with 4010 miles, single owner car? any thoughts?
thanks
RHR

[A1990]

I am new on this site so I probably did not post this in the correct place but my question is what the value is for a 1995 ZR1 with 4010 miles, single owner car? any thoughts?
thanks
RHR
You probably need to start a new topic with this and I know the first thing that is going to be asked is color combo...

[Jeffvette]

You're such a funny guy:rolleyes: , the truth is you could get um for around 3k a piece if enough were to be ordered at once but no body wants to make the crank brokers mad do they.[-X


Also couldn't resist...

I hear you're still calling around looking for crank eh? Guess you'll need to suck it up and go to one of the crank brokers.