Stainless Works Group Buy

[cvette98pacecar]

Here is the Stainless Works group buy. I will need you to click the links above on what you would like so I can get a final price from Stainless Works. If you feel extremely lucky you can head over to the Registry Store and purchase a few raffle tickets. I would like to get a final order complete by 5/24/2013. Any Part that Stainless Works builds themselves will be available for the Group buy. I am buying a CAT BACK Exhaust for my Wife 50th Anniversary Corvette.

Link to Headers: http://www.stainlessworks.net/chevy-corvette-1990-95-headers.html
Link to Exhaust: http://www.stainlessworks.net/chevy-corvette-1990-95-exhausts.html

Jet Coating is available at $335.00 per set of headers. There are two colors. Silver or Black.

This Group Buy is for members, So spend $35.00 to save hundreds.

ZR1S
http://i1199.photobucket.com/albums/aa468/rdemarco06/ZR1SBOM_zpsc72012d2.jpg (http://s1199.photobucket.com/user/rdemarco06/media/ZR1SBOM_zpsc72012d2.jpg.html)

http://www.stainlessworks.net/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/z/r/zr1s.jpg
__________________________________________________ __________________________________________________ ______________________________

ZR1FACTCAT
http://i1199.photobucket.com/albums/aa468/rdemarco06/ZR1FACTCATBOM_zps0f47224c.jpg (http://s1199.photobucket.com/user/rdemarco06/media/ZR1FACTCATBOM_zps0f47224c.jpg.html)

IMAGE
http://www.stainlessworks.net/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/z/r/zr1factcat.jpg
__________________________________________________ __________________________________________________ ______________________________

ZR1CORV3-8
http://i1199.photobucket.com/albums/aa468/rdemarco06/ZR1CORV3-8BOM_zps92d78786.jpg (http://s1199.photobucket.com/user/rdemarco06/media/ZR1CORV3-8BOM_zps92d78786.jpg.html)

IMAGE
http://www.stainlessworks.net/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/z/r/zr1corv38.jpg
__________________________________________________ __________________________________________________ ______________________________

ZR1C
http://i1199.photobucket.com/albums/aa468/rdemarco06/ZR1CBOM_zpsc0405454.jpg (http://s1199.photobucket.com/user/rdemarco06/media/ZR1CBOM_zpsc0405454.jpg.html)

IMAGE
http://www.stainlessworks.net/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/z/r/zr1c.jpg
__________________________________________________ __________________________________________________ ______________________________

X-PIPE
http://i1199.photobucket.com/albums/aa468/rdemarco06/Xpipe_zpsd625b574.jpg (http://s1199.photobucket.com/user/rdemarco06/media/Xpipe_zpsd625b574.jpg.html)
__________________________________________________ __________________________________________________ ______________________________

[4-cam]

Would the ZR1CORVCATwith performance connect with no EGR be available?http://www.stainlessworks.net/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/Z/R/ZR1CORVCAT.JPGbe available?

[cvette98pacecar]

Would the ZR1CORVCATwith performance connect with no EGR be available?http://www.stainlessworks.net/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/Z/R/ZR1CORVCAT.JPGbe available?

Yes, Every part that stainless works will be available.

[mike100]

I'm good for one ZR1C.

Specifically ZR1CHAMSW which is the zr1c with the chambered muffs and performance connect.

[Paul in SC]

I'm good for one ZR1C.

Specifically ZR1CHAMSW which is the zr1c with the chambered muffs and performance connect.

Mike,

Probably my choice as well depending on costs (no commitment yet).

and muffler choice...

Is anyone familiar enough with SW mufflers to advise on noise levels for chambered versus S-pipe? I am a little familiar with B&B with x-pipe sound, are these louder or equivalent? I would imagine the S-pipe is quite a bit louder but how about the chambered?

Thanks,
Paul

[Meanmyz]

I've cast my entry for ZR1FACTCAT with "jet" coating, which I take to mean the "thermal" coating from their site.

[Paul in SC]

Anything new on pricing or offer status?

Thanks

[Corbusa]

If my stainless tubing gets here soon , I'll be making an X pipe or ( H pipe ) and wont need the SW listed. So I'm a may be backing out ...Thats a maybe , let me know what the cost is and when.. thanks

[Meanmyz]

Where did everyone go? I know that more people were "raising their hand" on the other list.:cry:

[4-cam]

I'm in for ZR1CORCAT. I did not reply to the poll as it is not listed but did reply to the thread

[Paul Workman]

Edited (Resolved)

[Corbusa]

Youre right !! I was wrong.. I wasnt looking at it that way ... I was looking at it kind of like We talked about different brand names OF ( whatever ) in fact my thoughts were ( as mentioned in another thread ) to make the x pipe into an H pipe . Not meaning to slap someones face..As the new generation says " my bad" ..
PS too I also did not know they were a ZR1 supporter . Summit makes an x pipe too ( not as good as SW) but their not a supporter.. Didnt mean any offense ..

[XfireZ51]

Corb,

Well said.

[cvette98pacecar]

Cool. I will read all of the post to make sure nothing is missed when the order goes in to Stainless Works.

[Blue Flame Restorations]

Robert good job on all of these discounts and group buys.

Brett

[4-cam]

And thank you for putting this group buy together. I wish i waited as I already purchased the x pipe about 4 months ago. I am putting together the first copy of the FBI dynomax exhaust system in Colorado sans the Z06 flappers. I wish we had a good tuner in Colorado

[Paul Workman]

And thank you for putting this group buy together. I wish i waited as I already purchased the x pipe about 4 months ago. I am putting together the first copy of the FBI dynomax exhaust system in Colorado sans the Z06 flappers. I wish we had a good tuner in Colorado

The vacuum NPP exhaust flow control valves are a little hard to find. Dominic did find an off-shore maker of them, but as yet I've not finished researching a local vendor for their products.

Also, I may have found an alternative - also a vacuum actuated exhaust flow valve - for very reasonable cost from Summit Racing; have one on order for inspection, as a matter of fact. I will post up results when I get it in hand and can evaluate it a bit.

Stay tuned. The Registry is the place for all things ZR-1!!

[4-cam]

Thats great news on the exhaust valve alternative. Interesting to see how they work out. I will be clamping my tips so I can modify in the future as needed just in case its to loud.

[Meanmyz]

Robert,

Is there one final check-off after this on order details? I ask because if it is an option to install the air pipes on my headers, I would like that and when it comes down to details of a final order I don't want that missed. I didn't see it in the pics of the ZR1FACTCAT sheet.

Thanks.

Jeff

[cvette98pacecar]

Can everyone please send me what Stainless Works equipment they are interested in and their shipping address. I am going to get in touch with Paul from Stainless works and get final pricing for everyone.

[TCurtner]

Can everyone please send me what Stainless Works equipment they are interested in and their shipping address. I am going to get in touch with Paul from Stainless works and get final pricing for everyone.


just 'caught up' with this thread!!! Wow, almost missed it. Sending you info. Want the ZR1CORV3/8 (off road headers only)

[batchman]

PM sent with a "special need". If that can be done, I'm in.

Thanks,
- Jeff

[Ronstar]

would the 3" exhaust cut-outs qualify for discount? I dont think stainless makes them.

[cvette98pacecar]

would the 3" exhaust cut-outs qualify for discount? I dont think stainless makes them.

The discounts are on Stainless works products only.

[cvette98pacecar]

Everyone, The information for the headers and exhaust went into Paul with Stainless Works earlier today. I am hoping to get final pricing early on Friday.
Here is the list that went into Stainless Works for final pricing.

Please Verify all information.

User Name Stainless Works Description.
MeanmyZ ZR1FACTCAT
Ewest ZR1C
Mike100 ZR1C Chambered Mufflers and Performance connect.
Corbusa Xpipe
Funracer Xpipe
4 Cam ZR1CORVCAT performance connect no EGR.
Paul in SC ZR1C Chambered Mufflers and Performance connect.
Tcutner ZR1CORV3/8 Offroad headers
Batchman ZR1C With 791250 Quad tips
thethrillofspeed ZR1CORVCAT performance connect and X-pipe
ZR1 Registry 2) ZR1CORV3/8
Cvette98PC 1) ZR1CORVOR no EGR
1) Xpipe.
1) VC53CBQUAD

[cvette98pacecar]

Here are the discounted cost for the Stainless Works Group Buy. I do need everyones Name and Shipping addresses to get drop shipping cost.

MeanmyZ ZR1FACTCAT Retail $1390 Discounted price without shipping $973

Ewest ZR1C Retail $1050 Discounted price without shipping $735

Mike100 ZR1C Chambered Mufflers and Performance connect. Part Number ZR1CHAMSW Retail $1050 Discounted price without shipping $735

Corbusa Xpipe, Part Number ZR1x Retail $350 Discounted price without shipping $245

Funracer Xpipe, Part Number ZR1x Retail $350 Discounted price without shipping $245

4 Cam ZR1CORVCAT performance connect no EGR. Retail $1390 Discounted price without shipping $973

Paul in SC ZR1C Chambered Mufflers and Performance connect. Part Number ZR1CHAMSW Retail $1050 Discounted price without shipping $735

Tcutner ZR1CORV3/8 Offroad headers Retail $1190 Discounted price without shipping $833

Batchman ZR1C With 791250 Quad tips Retail $1050+136 Discounted price without shipping $735+95.2

thethrillofspeed ZR1CORVCAT performance connect and X-pipe Retail $1390+350 Discounted price without shipping $973/245

ZR1 Registry 2) ZR1CORV3/8 Retail $1190 Discounted price without shipping $833

Cvette98PC "VC53CBQUAD+ZR1CORVOR No EGR Performance Connection, X-pipe." Retail $890+1192+350 Discounted price without shipping $623/833/245

FU2 X-PIPE Retail $350 Discounted price without shipping $245

[Meanmyz]

....Just wondering where we are on this. Are we waiting for Stainless Works to calculate shipping costs?

Or, should we just contact Paul at SW and "make it happen"?

Thanks.

[cvette98pacecar]

....Just wondering where we are on this. Are we waiting for Stainless Works to calculate shipping costs?

Or, should we just contact Paul at SW and "make it happen"?

Thanks.

We Are waiting on Paul at Stainless works.

[BigJohn]

It is all Pete's falt!
:cheers:

[FU]

It is all Pete's falt!
:cheers:

Yep.....That Greek guy bending us over again.

[TCurtner]

It is all Pete's falt!
:cheers:

Is your avatar picture of your car? What IS that conversion (regardless)???:dontknow:

[BigJohn]

Is your avatar picture of your car? What IS that conversion (regardless)???:dontknow:

Yes!

It is a Callaway Le Mans!

:cheers:

[cvette98pacecar]

Here is a final list for the group buy. Please make sure everything is correct before you make payment to the Registry. Please make payment to on Paypal to finances@zr1netregistry.com if you are in a rush for your parts please make a comment so we could get your parts built first. I am in no rush so I could wait for what I need to get everyone else's order out faster.

Meanmy Z - ZR1FACTCAT Total Cost $1073.28 shipping to 56087

Ewest - ZR1C Total Cost $813.70 shipping to 19317

Mike 100 - ZR1C Chambered Mufflers and Performance connect. Part Number ZR1CHAMSW Total Cost $837.39 shipping to 92078

Corbusa - ZR1X (X-pipe) Total Cost $298.70 shipping to 37313.

Funracer - ZR1X (X - PIPE) Total Cost $298.70 shipping to ????

4 CAM - ZR1CORVCAT performance connect no EGR. Total Cost $1066.05

Paul in SC - ZR1C Chambered Mufflers and Performance connect. Part Number ZR1CHAMSW Total Cost $824.00 Shipping to 29501

Tcutner - ZR1CORV3/8 Offroad headers Total Cost $914.64 shipping to 37385

Batchman - ZR1C With 791250 Quad tips Total Cost $922.06

Thethrill of speed - ZR1CORVCAT performance connect and X-pipe Total Cost $1352.39

ZR-1 Registry (2) ZR1CORV3/8

Cvette98pc - ZR1CORVOR No EGR Performance Connection, X-pipe. Total Cost $1156.69 Shipping to 48734

FU2 - ZR1X Total Cost $298.70 Shipping to 60016

5ABI VT - ZR1CORVCAT performance connect no EGR. Total Cost $1079.52 Shipping to 14223

[FU]

Please be a little bit more specific where and how payment should be made.
Thank you.

[cvette98pacecar]

Please be a little bit more specific where and how payment should be made.
Thank you.

Was not sure, I was waiting for a response from Dennis.

[cvette98pacecar]

Yes!

It is a Callaway Le Mans!

:cheers:

Big John how many LM were made?

[mike100]

if it is going to be PP or some kind of webpage based CC payment I can pay right away, but if the Registry prefers low-tech, I can send a check in the mail:)

[BigJohn]

Big John how many LM were made?

Four LM race cars, Five LM street legal cars, and Only three LM race cars still remain.

Fornisari made about ten LM clones! (All the clones are in EU)


:cheers:

[cvette98pacecar]

if it is going to be PP or some kind of webpage based CC payment I can pay right away, but if the Registry prefers low-tech, I can send a check in the mail:)

Mike Paypal is fine.

[FU]

Mike Paypal is fine.

Send money to what Pay-Pal address ?

[cvette98pacecar]

Send money to what Pay-Pal address ?

finances@zr1netregistry.com

[Meanmyz]

Order placed....:cheers:

[Schrade]

Order placed....:cheers:


When will delivery be there Sir?

I'm wondering here if anyone in the buy list might be un-loading their old pipes, maybe offset the cost of the new hardware...

[mike100]

When will delivery be there Sir?

I'm wondering here if anyone in the buy list might be un-loading their old pipes, maybe offset the cost of the new hardware...

I ordered some other small items from SW recently and there was about a 10 day wait on manufacturing.

[cvette98pacecar]

When will delivery be there Sir?

I'm wondering here if anyone in the buy list might be un-loading their old pipes, maybe offset the cost of the new hardware...

I will be an entire 9K mile exhaust that will be for sale.

[Corbusa]

paypal sent

[Meanmyz]

When will delivery be there Sir?

I'm wondering here if anyone in the buy list might be un-loading their old pipes, maybe offset the cost of the new hardware...


In my case, it is the stock pipes on the car. I think I will keep them (for posterity). I am sure there are others that will be unloading theirs.

[5ABI VT]

Curious did these come with gaskets and bolts?

[cvette98pacecar]

Curious did these come with gaskets and bolts?

I do not know about gaskets. But I took this from their install .pdf

Install right and left headers using supplied bolts. Be sure flanges lay over guide
pins and flange lays flat on head. See note below for installing right header.

[Dynomite]

Curious did these come with gaskets and bolts?

No gaskets with SW Headers....get Exhaust Manifold gaskets from Jerry's Exhaust Header Gasket (http://jerrysgaskets.com/store2/root/index.php?main_page=product_info&cPath=0&products_id=38)

I would use Stage 8 Header Bolts from Summit Racing and just discard the SW provided bolts that come with the Headers.
Installing Headers (http://forums.corvetteforum.com/c4-zr-1-discussion/3005470-tech-info-lt5-modifications-rebuild-tricks-500-hp-5.html#post1581825195)

LT5 Summit Racing (http://www.summitracing.com/parts/STG-8905/) 8905
LT5 8mm x 1.25 The underhead length is 25 mm or about .98 inches

http://i287.photobucket.com/albums/ll142/dynomite007/91%20ZR1/Headerbolts.jpg

[5ABI VT]

Very cool I saw your sig searching some old threads was one of the reasons I asked :) gaskets ordered... Are the bolts any significant upgrade over the provided bolts? I've never had headers loosen up over time so just wondering if there any advantages .. Ease of install etc?

[Dynomite]

Very cool I saw your sig searching some old threads was one of the reasons I asked :) gaskets ordered... Are the bolts any significant upgrade over the provided bolts? I've never had headers loosen up over time so just wondering if there any advantages .. Ease of install etc?

Just got done installing SW Headers on a 90' using Stage 8 bolts. They are about the same installing as other header bolts except you place the locks on which is really not that hard either. There is an advantage using Stage 8 bolts as they have an Allen socket as well as the hex head. Using Stage 8 I do not apply too much torque knowing the headers bolts are locked.

[5ABI VT]

If you don't mind me asking do the Allen sockets come in handy on any hard to reach bolts ? They look good I think ill just get them. If they make install a bit easier then ill get them for sure. I need to get a mAnual what are the torque specs for header bolts ?

[Dynomite]

If you don't mind me asking do the Allen sockets come in handy on any hard to reach bolts ? They look good I think ill just get them. If they make install a bit easier then ill get them for sure. I need to get a mAnual what are the torque specs for header bolts ?

Yes....for two or three bolts the Allen socket is easier to reach with an Allen wrench.

The Stage 8 Exhaust Header Bolts have 7/16 inch hex heads with a 3/16 Allen socket in the center. I use a 1/4 inch socket wrench with a swivel and several extension lengths as required to tighten the Stage 8 bolts. I do not use a torque wrench as that would be next to impossible to accomplish with the tight spaces around the Headers. I also use a 7/16 flex head ratchet wrench. Typically, the torque for an 8mm bolt would be 19 ft lbs.

[4-cam]

Just curious if anybody has used header studs on the LT5 or is there not enough room in the tight confines of our engine bay

[4-cam]

Just wondering, do we have an expected ship date yet?

[Meanmyz]

Just got my delivery...haven't opened the package yet. :)

[4-cam]

Mine just showed up. I Can't wait to start the transformation but a short family vacation is in order before the real fun begins.

[mike100]

Just got mine...


http://i29.photobucket.com/albums/c265/mschrameck/DSC02704_zps70066fa2.jpg (http://s29.photobucket.com/user/mschrameck/media/DSC02704_zps70066fa2.jpg.html)

http://i29.photobucket.com/albums/c265/mschrameck/DSC02708_zps2383f92c.jpg (http://s29.photobucket.com/user/mschrameck/media/DSC02708_zps2383f92c.jpg.html)

Might go with 4 chrome tips though...we'll see. BTW the x-pipe does not have the perforated core-it's all pipe.

Thanks to all who made the GB happen.=D>

[Dynomite]

Just got mine...
Might go with 4 chrome tips though...we'll see.

I have the 4 SW chrome tips on the 91' and just a few weeks ago got a set of SW for the 90' and with that set received the chrome rectangular box outlets exactly as you have.

But actually after I got the rectangular outlet boxes installed.....I like them as they fit perfectly in the cut out of the rear fiberglass. You just level the retangular outlet box so it is parallel with the cut out. You can get used to that look very fast ;)

SW provides four VERY SUBSTANTIAL CLAMPS for the exhaust Rectangular outlet box.....that is for sure.....:D

I do not have a photo handy but you get the picture :p

One little trick.....for installed SW Headers ZR1CORVOR and SW Exhaust ZR1CHAMSW.

Copper spacer added (two each 1 x 6 inch copper pipe
with coupler and end caps) to keep SW exhaust 1/4 inch
away from riding against Differential Housing. The end caps
and coupler actually keep the spacer in place without any ties.

I set the two rear hangers so they pull the
exaust up tight against the copper spacer. Also set the rear "L"
hanger so there is freedom of the exhaust system to move to
the rear at least 1/2 inch when hot.

http://i287.photobucket.com/albums/ll142/dynomite007/A%20Corvette%20LT5%2090/74c3b050-4f4e-4410-8ec5-62a8a78ecc2a.jpg (http://s287.photobucket.com/user/dynomite007/media/A%20Corvette%20LT5%2090/74c3b050-4f4e-4410-8ec5-62a8a78ecc2a.jpg.html)
http://i287.photobucket.com/albums/ll142/dynomite007/ZR1%20NET/e3a9750d-43dd-46b7-b85e-2056007a81e8.jpg (http://s287.photobucket.com/user/dynomite007/media/ZR1%20NET/e3a9750d-43dd-46b7-b85e-2056007a81e8.jpg.html)

http://www.stainlessworks.net/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/z/r/zr1chamsw_1.jpg

[XfireZ51]

Just got mine...


http://i29.photobucket.com/albums/c265/mschrameck/DSC02704_zps70066fa2.jpg (http://s29.photobucket.com/user/mschrameck/media/DSC02704_zps70066fa2.jpg.html)

http://i29.photobucket.com/albums/c265/mschrameck/DSC02708_zps2383f92c.jpg (http://s29.photobucket.com/user/mschrameck/media/DSC02708_zps2383f92c.jpg.html)

Might go with 4 chrome tips though...we'll see. BTW the x-pipe does not have the perforated core-it's all pipe.

Thanks to all who made the GB happen.=D>

So instead of the Xpipe, they gang punched the mufflers!

[Dynomite]

So instead of the Xpipe, they gang punched the mufflers!

This is called the SW X-Pipe and is installed on both my 90' and 91'
The 90' installation is just a few weeks ago. My SW X-Pipes are just a bit different.

http://www.stainlessworks.net/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/z/r/zr1chamsw_1.jpg

[XfireZ51]

This is called the SW X-Pipe and is installed on both my 90' and 91'
The 90' installation is just a few weeks ago. My SW X-Pipes are just a bit different.

http://www.stainlessworks.net/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/z/r/zr1chamsw_1.jpg

Cliff,

Sorry but I'm pretty sure I'm looking at the muffler. When I got my SW Xpipe, it had the gang punched inserts which Al removed. My Dynomax mufflers don't look anything like that. They're straight thru.

[mike100]

They have another version of muffler that is louder and more directly straight thru. This chambered version has a little offset and an air gap to allow resonance into the packing plus the perforated tubes. I can tell already that it will still be pretty loud. I figure I can always go to a traditional turbo muffler again if needed.

my plan is to try and fit LS7 cats I have and go with this cat-back. hopefully putting catalysts back on the car will moderate some of the rumble.

[Dynomite]

Cliff,

Sorry but I'm pretty sure I'm looking at the muffler. When I got my SW Xpipe, it had the gang punched inserts which Al removed. My Dynomax mufflers don't look anything like that. They're straight thru.

I am soooo confused sometimes......:D

but on another subject....my X-pipes have the cross plates which mike100 does not have on his.

They have another version of muffler that is louder and more directly straight thru.

I have the same version (Offroad)......My SW exhausts are ZR1CHAMSW ......so I guess the same as mike100 ;)
And I get some resonance in some gears at some rpms but can shift out of resonance easy.

[FU]

That SSW exhaust system look's great ! Workmanship is fantastic.
Please post up about noise/resonation.

[Dynomite]

That SSW exhaust system look's great ! Workmanship is fantastic.
Please post up about noise/resonation.

Frank....I think you were asking Mike.....but.....I just took the 91' for a spin and no real resonance. It is loudest at 2,000 rpm with moderate throttle. It is really nice just cruzing in 4th or even 5th and letting off the throttle in 6th just coasting at 65 is just a nice hum.

Any time you step on the throttle you can definitely hear it but again....from inside with windows up (100 deg F outside) and air on it is very nice listening to :cheers:

Temperature gage did never get over half way ;)

[FU]

Going to try that system with the C6 ZO6 flapper's.

[mike100]

I'm setup for next Saturday with my exhaust guy so I should know then how crazy the SW muffs will be. I will be adding the LS7 cats so lets hope for some sanity in the resonance dept.

NPP valves from a c6 would probably be worth it since twin outlet mufflers are known to be loud on C4's.

[ZZZZZR1]

Frank....I think you were asking Mike.....but.....I just took the 91' for a spin and no real resonance. It is loudest at 2,000 rpm with moderate throttle. It is really nice just cruzing in 4th or even 5th and letting off the throttle in 6th just coasting at 65 is just a nice hum.

Any time you step on the throttle you can definitely hear it but again....from inside with windows up (100 deg F outside) and air on it is very nice listening to :cheers:

Temperature gage did never get over half way ;)

Cliff,

Can you post pictures of the tips? (installed)

Love to see how they look....

:cheers:

David

[Dynomite]

Cliff,
Can you post pictures of the tips? (installed)
Love to see how they look....

:cheers:

David

I think you are talking the Chrome Retangular Tips that Mike received rather than individual Chrome cylindrical tips?

That installation is on my 90' just a couple weeks ago in SD.

This was taken during installation and they are not adjusted yet. The angle also does not show the great Chrome of each Rectangular Tip.

90' with SW Chrome Rectangular Exhaust Tips
http://i287.photobucket.com/albums/ll142/dynomite007/90%20ZR1/69109316-5dc3-4708-94a9-f89ec1ea027a.jpg (http://s287.photobucket.com/user/dynomite007/media/90%20ZR1/69109316-5dc3-4708-94a9-f89ec1ea027a.jpg.html)

91' with SW Chrome Cylindrical Exhaust Tips
http://i287.photobucket.com/albums/ll142/dynomite007/A%20Corvette%20LT5%2091/BADZb-21.jpg (http://s287.photobucket.com/user/dynomite007/media/A%20Corvette%20LT5%2091/BADZb-21.jpg.html)

I can say this about that............I thought as Mike did.....WOW..I was expecting the four individual chrome cylindrical Tips from SW like I have on my 91'. These two Chrome Rectangular Tips (one each side) just will not look as good.

But.........But.....I changed my mind after I got them installed because the Chrome rectangular Tips fit so nice in that Exhaust body cutout which is also rectangular :thumbsup:

I will not be converting to four individual Chrome cylindrical Tips on the 90' because I like the looks of those Chrome rectangular Tips matching the body exhaust cut out.

Also will not be converting to two Chrome Rectangular Tips on my 91' as I kind of got used to the four individual Chrome cylindrical Tips ;)

Both Types Look Good :thumbsup:

[Dynomite]

Just some tips you might have not thought about installing the NEW SW HEADERS......

5ABI VT Stock Exhaust Manifold Removal and SE Header Install (http://www.zr1.net/forum/showthread.php?t=20989)

Post 87 - Installing Headers and Exhaust (http://forums.corvetteforum.com/c4-zr-1-discussion/3005470-tech-info-lt5-modifications-rebuild-tricks-500-hp-5.html#post1581825195)