WTB: 94-95(96) Pass Dash panel

[-=Jeff=-]

I am looking for the lower dash hush panel for a 94-95 or even 96 narrow body

Must be Torch red..

[GOLDCYLON]

I am looking for the lower dash hush panel for a 94-95 or even 96 narrow body

Must be Torch red..


Didnt Torch red stop in 91?

Are you doing a Vetmed conversion ?

[-=Jeff=-]

Didnt Torch red stop in 91?

No it was Flame red in 1992 that stopped



Are you doing a Vetmed conversion ?

Yes hoping to

[GOLDCYLON]

Yep thats right. You know you need to mod the door panels right ?

[-=Jeff=-]

Yep thats right. You know you need to mod the door panels right ?

Mod them how? I have 95 Door panels on the car so i would expect to NOT mod them..

I would be curious what mod will be needed for the 90-93 panels though

[GOLDCYLON]

Mod them how? I have 95 Door panels on the car so i would expect to NOT mod them..

I would be curious what mod will be needed for the 90-93 panels though


http://www.zr1.net/forum/showthread.php?t=13377&highlight=interior&page=4


The metal skin and the door actuctor you talked about is in Post #103. However sounds like you are already been there and done that with the panels. Any idea for the gap problem like Andrew ran into. Mabye a leather filler filler for the hushpanel to dash mating area ? Gap is show in post #90. GC

[-=Jeff=-]

Yeah this:
http://www.zr1.net/forum/showpost.php?p=110654&postcount=90

Not sure yet.. need to get a panel first to see what I need to do.. I have 2 dash pads.. both for 90s.. one i car and an extra that needs the lower piece covered.. but I feel the newer lower set-up would work well to match the door panel

I have a couple ideas for the gap, but like I said I need a panel first

[GOLDCYLON]

Try shawn@corvettenutz.com he might be able to help you out. GC

[-=Jeff=-]

Last time I checked he did not have one..

[GOLDCYLON]

Last time I checked he did not have one..


Check often as inventory sadly changes... Means another C4 bites the dust and feeds us turkey vultures.

[-=Jeff=-]

just emailed him again

[-=Jeff=-]

TTT

anyone have anything?

[GOLDCYLON]

Damn -=JEFF=- I was hoping you were way on your way by now with this project. Im still waiting for my final pieces of interior CF to be done

[-=Jeff=-]

Nope.. I do have a couple places to get anything but red, then I need to get it recovered in red

[-=Jeff=-]

Finally found one.. Nee to decide if I mid the current dash our swap to the 94-up style

[GOLDCYLON]

Finally found one.. Nee to decide if I mid the current dash our swap to the 94-up style


Cool glad to hear it

[-=Jeff=-]

I think my dash will get cut and I will swap the lower hush panel.. it will make the interior fit better, although I need a new dash pad anyway so maybe I should change to the 94-later style

[GOLDCYLON]

I think my dash will get cut and I will swap the lower hush panel.. it will make the interior fit better, although I need a new dash pad anyway so maybe I should change to the 94-later style

So no glove box?

[-=Jeff=-]

So no glove box?

Potentially.. I will probably start with the lower hush swap first like Andrew did..

I need to find a good Dash pad, so I will keep my mind open, if I find a excellent 90-93 piece then I will keep that style.

and yeah I really would miss the glovebox