PDA

View Full Version : Where to get an ECM & Eprom


slacha1
03-03-2013, 06:27 PM
Hello,
I am looking for an ECM and an Eprom package (the blue cal-pack/chip) for a 1991 ZR-1. Any idea ?
Thx
Steve

XfireZ51
03-03-2013, 07:17 PM
Looking for both or just the cal-pak?

Kevin
03-03-2013, 07:21 PM
can't any ecm be used for the zr-1?

XfireZ51
03-03-2013, 10:22 PM
can't any ecm be used for the zr-1?

If u mean any LT-5 ECM, yes. As long as u use the correct year calibration.

Kevin
03-03-2013, 10:27 PM
If u mean any LT-5 ECM, yes. As long as u use the correct year calibration.

i thought I read that any ecm was useable with an lt5 prom. but i've been wrong before. ask my wife

secondchance
03-03-2013, 11:10 PM
I believe any year ZR-1 ecm will work as long as you have a crrect year eprom - cannot use an ECM out of a LT1 car.
Check with Kurt - whiteracingproducts.com.

XfireZ51
03-04-2013, 12:00 AM
i thought I read that any ecm was useable with an lt5 prom. but i've been wrong before. ask my wife

Your wife is correct. ;-)

slacha1
03-04-2013, 02:38 AM
I am looking for both, the ECM and the cal-pack.
As I understood from some replies any LT5 year ECM will do but the Cal-pack will need to be a 1991 ...

XfireZ51
03-04-2013, 09:43 AM
I am looking for both, the ECM and the cal-pack.
As I understood from some replies any LT5 year ECM will do but the Cal-pack will need to be a 1991 ...

To be accurate, any calpak will work as long as the correct model year calibration is burned on it. The one exception for this is the 90 calpak which does not have the knock filter on board.

GOLDCYLON
03-04-2013, 11:05 AM
i thought I read that any ecm was useable with an lt5 prom. but i've been wrong before. ask my wife


Not unless its a LT5 ECM. With the correct MY Prom for the LT5