Stage 1 cams for sale

[rbidwell]

In the next couple of weeks I will have a set of South Georgia Stage 1 cams for sale. Corey Henderson is pulling them from my 1990 368 ci engine.

[pantera1683]

In the next couple of weeks I will have a set of South Georgia Stage 1 cams for sale. Corey Henderson is pulling them from my 1990 368 ci engine.

Price, mileage?

[Jagdpanzer]

What cams are you putting back in?

[rbidwell]

I believe they have about 15,000 miles on them after being reground and cyrogenically (sp) treated. I would like to get $1500.00.

I am putting stock cams back in.

[pantera1683]

Thanks. Do you have the cams' specs? I am curious to know how they compare to stock. I am building a 402 (eventually) and might be interested in these.

[rbidwell]

The only information I have is that the duration is 229 degrees and .420 lift. They are South georgia Corvettte stage 1's.

[XfireZ51]

Are they intake and exhaust, just intake, just exhaust?

[rbidwell]

all four will be for sale

[Blue Flame Restorations]

Do you already have stock cams. I may be interested in a trade. I have a set of stock cams.

[rbidwell]

Yes, I already have the stock cams.

[Blue Flame Restorations]

Yes, I already have the stock cams.


ok, thanks

[Hog]

I believe they have about 15,000 miles on them after being reground and cyrogenically (sp) treated. I would like to get $1500.00.

I am putting stock cams back in.

Whyt are you going back to stock bumpsticks?

peace
Hog

[rbidwell]

twin turbos

[ZZZZZR1]

twin turbos

Woah!!!!!!!!

:USFlag:

[rbidwell]

The cams are now out of the engine and available. If interested make me an offer.

Ron Bidwell

[rbidwell]

The cams were found to be damaged and are no longer for sale.

Ron Bidwell

[GOLDCYLON]

The cams were found to be damaged and are no longer for sale.

Ron Bidwell


Ron where were they damaged if you dont mind me asking? GC

[rbidwell]

Corey let me know they were damaged, but not where. I have not seen them. I believe he was going to see if Pete might have a solution to fixing them.

Ron

[RHanselman]

Sorry to hear that Ron... Hope there is a fix...

[WARP TEN]

Corey let me know they were damaged, but not where. I have not seen them. I believe he was going to see if Pete might have a solution to fixing them.

Ron

It would be interesting to know exactly what sort of damag they incurred and why, whether or not there is a fix. But I hope there is a reliable fix. Pete should have an idea on that. --Bob

[rkreigh]

good luck on the turbo project. stock cams should work well. be interested to hear more!! you are in good hands with corey, that's for sure

[rbidwell]

Thanks. I'm sure Ron Hanselman will keep everyone updated. He started a thread under the tech section. Right now Corey has the engine apart and waiting for parts (pistons, rods, lifters, etc)

Ron Bidwell