PDA

View Full Version : HT2236 Lifters on sale @ Rock Auto

limey
10-10-2012, 10:57 AM
Was looking for a part today and rock auto has a sale on the HT2236 lifter.

$4.80 each, they have 93 in stock.

That's a very good price!
XfireZ51
10-10-2012, 11:40 AM
Was looking for a part today and rock auto has a sale on the HT2236 lifter.

$4.80 each, they have 93 in stock.

That's a very good price!

Better measure them. I bought these last year and they were the wrong height. Went w the Melling.
ALZR1
10-12-2012, 10:31 AM
Concur :thumbsup:

See Lifters (http://forums.corvetteforum.com/c4-zr-1-discussion/2942622-tech-info-lt5-new-rebuild-zero-compression.html#post1579115169)

I use Melling JB 2236 Lifters

Melling is what I use as well.

AL.
scottfab
10-12-2012, 11:38 AM
I have notified RockAuto that they may be selling the
wrong size part. Let's see what they say.
We may also find out who supplies them (middle man)
with the pad parts (if indeed they are bad).
Pete
10-12-2012, 01:54 PM
Concur :thumbsup:

See Lifters (http://forums.corvetteforum.com/c4-zr-1-discussion/2942622-tech-info-lt5-new-rebuild-zero-compression.html#post1579115169)

I use Melling JB 2236 Lifters


I thought i remembered someone had pictures.
Nice Cliff.

By the way for some of us CF is Nazi Forum you have that on this forum.
I'm sure you do i'm just too lazy to look for it.:)

But i see Nazi Forum is bringing back babe pictures i guess there tight @ss is loosening a bit,they must have a lot of Greek members.
See what a lil KY and a few Greeks locked in a room with the moderators can do.;)

Pete
scottfab
10-12-2012, 03:13 PM
Better measure them. I bought these last year and they were the wrong height. Went w the Melling.

Rockauto replied with:
"Just to be sure of the listing, we checked with Federal-Mogul's technical assistance department concerning this part. They confirmed the application of this part number to the 1990 Corvette with the 5.7 liter dual overhead cam engine, i.e., the ZR-1."
limey
10-12-2012, 05:09 PM
Hah, interesting as someone purchased 48 of them since yesterday.

I guess whoever did better measure them.
XfireZ51
10-14-2012, 11:59 AM
I think that was Pete's senior prom date!
scottfab
10-14-2012, 01:23 PM
snip
Maybe I should test those boys over on CF to see if they REALLY LIKE BABES :D
http://i287.photobucket.com/albums/ll142/dynomite007/BadSheep.jpg

I knew there was something a bit different about you Clif.:eek:
Don't get me wrong I know it gets cold up there in SD.:jawdrop:
Pete
10-14-2012, 04:32 PM
I see you guys found a picture of my prom date.
She used to love peanut butter.LOL

You guys are jealous:p

Since i like you guys i will share.

Pete
XfireZ51
10-14-2012, 09:39 PM
I see you guys found a picture of my prom date.
She used to love peanut butter.LOL

You guys are jealous:p

Since i like you guys i will share.

Pete

Would she do a 3 way?
limey
10-15-2012, 12:18 AM
The moral of the story and to not get too complicated, these HT2236 lifters work perfect on a stock engine without any modifications, correct?
Pete
10-15-2012, 01:29 AM
The moral of the story and to not get too complicated, these HT2236 lifters work perfect on a stock engine without any modifications, correct?


Kurt a friend ordered a few he recieved them and the ones he got were stock OE specs,on the boxes they say "Made in the USA" maybe some NOS parts.
It's like what Cliff mentions depends where they were made.

But the answer to your question is yes they will work on a stock motor with stock cams.

Pete
scottfab
10-15-2012, 12:43 PM
The moral of the story and to not get too complicated, these HT2236 lifters work perfect on a stock engine without any modifications, correct?

If you bought say 48 of them you'd be good to go.
Good news.