FS: Gen I Dymags

[Daniel_Mc]

Hey guys I have a set of refinished NEVER MOUNTED set of 4 Dymag wheels (2 fronts, 2 rears). The fronts are 17 by 9.5 with the "Dymag" and "Corvette" lettering. The fronts have provisions for center caps and the Dymag brake coolers. The rears are 17 by 11 (ZR-1 offset) with provisions for center caps and no markings. The wheels will come with both sets of caps. The wheels were refinished by Ye Ole Wheel Shop in MD in the correct Dymag paint code. Since being refinished the wheels have never been mounted on a car or even had tires mounted. I picked them up for the ZR-1 and they will not clear the AP Racing Brakes and do not clear the Wilwoods on the 89.

5,000.00 plus shipping

Rears:
http://img835.imageshack.us/img835/2656/picture083t.jpg

http://img190.imageshack.us/img190/3765/picture027gy.jpg

Fronts:
http://img190.imageshack.us/img190/9999/picture025ne.jpg

http://img718.imageshack.us/img718/8717/picture024zy.jpg

Covers (small):
http://img32.imageshack.us/img32/8417/picture022du.jpg

Covers (large):
http://img193.imageshack.us/img193/8898/largecenters2.jpg

[Daniel_Mc]

Rears:
http://img718.imageshack.us/img718/2199/picture019nw.jpg

http://img835.imageshack.us/img835/1897/picture095jo.jpg

http://img27.imageshack.us/img27/2949/picture021hp.jpg

Fronts:
http://img685.imageshack.us/img685/2811/picture091z.jpg

http://img571.imageshack.us/img571/6669/picture092z.jpg

http://img171.imageshack.us/img171/4669/picture085b.jpg

Thanks for looking!!

Daniel

[LGAFF]

Have a set on my 90....these look awesome! Deep Dish in the rear that pics cannot do justice!

[GOLDCYLON]

Dan if you havent already you might want to advetise on the Callaway Owners Group fourm. Just an idea. GC

[Daniel_Mc]

Have a set on my 90....these look awesome! Deep Dish in the rear that pics cannot do justice!

You are so right. I loved the look of the narrow Gen I's on the 89 I just wish they woudl still fit the dish would look so much better!

Dan if you havent already you might want to advetise on the Callaway Owners Group fourm. Just an idea. GC

Thanks I had them posted on that site but I don't think it gets much traffic.

Daniel

[Paul in VA]

Do you have the Dymag brake coolers (or a single example) that we may see? If not, could you describe them?

[Kevin]

ok ok ya got me....i'll take em. if you'll take payments of $50 a month ;)

[Blue Flame Restorations]

Do you have the Dymag brake coolers (or a single example) that we may see? If not, could you describe them?


I have access to original unused Corvette Challenge brake cooling hats from the Dieline team. Forgot about that, actually......

[Daniel_Mc]

Do you have the Dymag brake coolers (or a single example) that we may see? If not, could you describe them?

No, I do not. I searched for a bit but even someone that knew what I was talking about was hard to find.

Here is a picture of them installed on a World Challenge Corvette:
http://img29.imageshack.us/img29/7116/dm8g.jpg


ok ok ya got me....i'll take em. if you'll take payments of $50 a month ;)

Cool how much are you putting down? :-D

I have access to original unused Corvette Challenge brake cooling hats from the Dieline team. Forgot about that, actually......

That would be cool to see what are they made of?

Daniel

[Blue Flame Restorations]

Daniel, they are plastic and never used.

[Paul in VA]

Thank You for the picture! One last question, Did the original Dymag wheel have the DYMAG or CORVETTE cast in lettering painted or somehow otherwise colored a contrasting color?

[Daniel_Mc]

Thank You for the picture! One last question, Did the original Dymag wheel have the DYMAG or CORVETTE cast in lettering painted or somehow otherwise colored a contrasting color?

Paul,
Not that I know of. All of the ones on the B2K's that I have seen that were "original" never had contrasting color.

Bump still have the Dymags!!!

Daniel

[Blue Flame Restorations]

I have never seen the wording painted and I've owned several sets. Lee (LGaff) has owned more sets than I have and would be a good source.

[LGAFF]

Thank You for the picture! One last question, Did the original Dymag wheel have the DYMAG or CORVETTE cast in lettering painted or somehow otherwise colored a contrasting color?


I think its was just the shading effect caused by it being recessed lettering

[cvette98pacecar]

Paul,
Not that I know of. All of the ones on the B2K's that I have seen that were "original" never had contrasting color.

Bump still have the Dymags!!!

Daniel

You better keep those gen 1, You are going to need a set of wheels to put on your dads yellow 92.

[dkalling]

[QUOTE=Daniel_Mc;140677]Hey guys I have a set of refinished NEVER MOUNTED set of 4 Dymag wheels (2 fronts, 2 rears). The fronts are 17 by 9.5 with the "Dymag" and "Corvette" lettering. The fronts have provisions for center caps and the Dymag brake coolers. The rears are 17 by 11 (ZR-1 offset) with provisions for center caps and no markings. The wheels will come with both sets of caps. The wheels were refinished by Ye Ole Wheel Shop in MD in the correct Dymag paint code. Since being refinished the wheels have never been mounted on a car or even had tires mounted. I picked them up for the ZR-1 and they will not clear the AP Racing Brakes and do not clear the Wilwoods on the 89.

5,000.00 plus shipping

Rears:
http://img835.imageshack.us/img835/2656/picture083t.jpg

http://img190.imageshack.us/img190/3765/picture027gy.jpg

Fronts:
http://img190.imageshack.us/img190/9999/picture025ne.jpg

http://img718.imageshack.us/img718/8717/picture024zy.jpg

Covers (small):
http://img32.imageshack.us/img32/8417/picture022du.jpg

Good afternoon Daniel,
I have just registered for the ZR-1 Registry and am inquiring about the Dymag SMALL Center Cap Covers that you have posted. Do you still have these?
I purchased a 1986 Convertible about 4-months ago, that has a set of (4) Dymag Wheels mounted (16 x 9.5) and I have been looking for center caps ever since. I have been told that these wheels came off a a 1987 Callaway SCCA Challenge car. The wheel bore is 2 3/8", and there are 5 drilled and tapped holes where probably some sort of brake cooler was installed. The dimension between two adjacent of these holes is 1 7/8" and they were tapped for M6 (metric) bolts. (Photo attached).
What is the outer diameter of these caps, and if they snap in, what is the diameter of the clips on the rear. (outside measurement from one clip to the opposite clip).
I am wondering if these small caps would fit, and if so what price?
Thanks for your prompt response.
Dave Kalling (dkalling@sbcglobal.net)
http://img193.imageshack.us/img193/8898/largecenters2.jpg