Wagner slave fitment issues?

[EV2DEMON]

Anyone else experience fitment issues with the Wagner slave cylinder (SC103711)? The stock piece has a flange made out of stamped steel. On the Wagner piece, the whole thing is made out of a casting. It seems like the thicker flange causes the whole thing to sit back a little further, and the boss for the line hits the transmision. There's no way the fitting would screw in.

Anyone have a part number for a slave that they know will fit on a 91?

[efnfast]

http://www.powertorquesystems.com/

All you need to know.:handshak:

[mike100]

Cast iron housing replacement part:

This fit my car ok (http://www.oreillyauto.com/site/c/detail/PTQ6/CS2296/01352.oap?year=1995&make=Chevrolet&model=Corvette&vi=1041376&ck=Search_01352_1041376_-1&pt=01352&ppt=C0015)

http://i29.photobucket.com/albums/c265/mschrameck/Cars/DSC03698.jpg

[dan1495]

X3 for the Powertorque from O'reilly. I bought a Wagner from Rock Auto and there was no way that was ever going to work.

[EV2DEMON]

X3 for the Powertorque from O'reilly. I bought a Wagner from Rock Auto and there was no way that was ever going to work.

Yeah, that's what I got. It's not even close, really.

[Demps]

Similar part-->I took out zirk fitting, mounted unit, then screwed fitting back in. Filling, bleeding was sporty.
Ted

[-=Jeff=-]

I got a replacement master and slave from Jim @ http://www.powertorquesystems.com/

the Cast stuff will not last and was not working very for me..

[Gunny]

http://www.powertorquesystems.com/

All you need to know.:handshak:

I've just been down this road and all the road signs pointed to powertorquesystems and Jim Jandik.

Call Jim ... if your membership in the ZR-1 Net Registry is current, mention this to him ... feel free to mention my name.

George Jones

[VetteMed]

Jim Jandik at power torque systems was A+ to work with. His service is top notch, and well worth the price -- which really isn't much more than the junk you get at the parts stores.