Jim Jandik.. Top notch

[-=Jeff=-]

You don't find many guys like this that take time out of their day to talk to you and explain their products..

I recently installed a Master and Slave form him and they work AWESOME.. much better then the Cast pieces..

I also sent him old masters and slaves I had for use for others.

Jim is the place to go for the Clutch pieces, I don't regret spending the extra $$ for quality parts

[ZZZZZR1]

Jeff

I've heard that from quite a few lately!

Thanks for posting. :thumbsup:

David

[Gunny]

Jim Jandik is the master ...
very knowledgeable of clutches as well as hydraulics in general, gets parts to you fast, does a follow up call to make sure everything is OK, etc. etc. etc. If you need help with your clutch Jim needs to be on your short list.

George Jones

[VetteMed]

Amen to the above. Jim set me up with everything I needed to get my clutch working 100%. That was some of the best money I've ever spent on my Z!

[RHanselman]

I just replaced my slave in #140 and Jim was great to work with. I'm sending the old one back to him for rebuild...

[HAWAIIZR-1]

Another satisfied customer of Jim Jandik. Great guy and the highest quality clutch products. I bought one new and had him rebuild two clutch slave cylinders.:cheers:

[Scrrem]

Yes, Jim is a great guy to deal with, sent me new master and slaves and I returned him my old units for rebuild and they came back looking like new. You should be seeing an article on LT5 pressure plates submitted by Jim in the next news letter.
Rich

[John Boothby]

I have to agree! Jim is the man when it comes to clutch parts. I just purchased a slave cylinder from him to replace the defective one that the dealer installed 8K ago. And the price was very good! I have to say that our registry has put together a great group of resources to keep our cars running for a long time.:handshak:

[C4Fanatic]

Stood at his booth at Bloomington last year and learned more about our clutches than I think I could ever remember, he's a great guy and will be my first stop when it's clutch time. :cheers:

[gbmidyear66]

When I was replacing my speed sensor last month I noticed that my slave was wet with fluid, so I searched the forum and Power Torque was mentioned as the place to get a new one.

I called up and spoke to Jim - who could not have been more helpful. Great guy :icon_thum

[brodykelly]

jim is the man, i agree i spoke with him yesterday for about hr. and he explained to me what i'm getting ready to tackle w my clutch replacement, he sold me the parts i need [what he reccomends] and explained in detail how the system works, i've decided to not install the fidanza and blue spring disc i got from Lee but will keep as spare, will be going back stock, jim also said to call him during the process for any tips/info i need. thanks Jim, your knowledge and customer support are rare, thanks and look forward to recieving your parts and doing the install...... brody p.