Oil Cooler Line Leaks

[Mystic ZR-1]

It finally happened (on the 1st ride of the season!), the swaged fitting on upper hose leaks where it connects to the tubing/elbow going into the cooler.
Any suggestions? Where can you get the braided stainless hoses with the preinstalled fittings etc?
Thanks,
Doug

[GOLDCYLON]

It finally happened (on the 1st ride of the season!), the swaged fitting on upper hose leaks where it connects to the tubing/elbow going into the cooler.
Any suggestions? Where can you get the braided stainless hoses with the preinstalled fittings etc?
Thanks,
Doug

I think Kurt (Limey) had some still for sale I dont think the Haibeck ones are braided

[VetteMed]

And there's also the option of having a local hydraulic shop make up a set for you, if all else fails.

[Blue Flame Restorations]

Jerry's Gaskets sells them. I just bought a unit.

[-=Jeff=-]

wasn't corvette central or some place selling them too?

[GOLDCYLON]

Unless I am mistaken none of those are braided as requested by the OP ? :confused:

[mike100]

And there's also the option of having a local hydraulic shop make up a set for you, if all else fails.

Just a little clarification here- you'll need to have a fitting or nut welded onto the oem tubing because the line crimping machine won't fit around the double line setup. With fittings welded onto the original flange, a shop can make two separate hoses easily enough that you screw on later.

[limey]

http://www.whiteracingproducts.com/index.php?main_page=product_info&cPath=1467_10_66&products_id=1001

[Norsky4360]

I also just ordered a hose set from Jerry's Gaskets. Like the OEM look better than the braided look.