rkreigh
04-16-2006, 11:43 AM
alot of this stuff is getting hard to find. can bring anything prepaid to Bowling Green to save shipping charges. all parts plus shipping.
I also have alot of "miscellaneous" underhood plenum vacuum cans and sensors, best offer. prices are flexible, make me an offer!! this stuff has to go to help pay for the racing season. help sponsor the "vettahaulic" ( 1980 BB Alchy race vette)
Bill Boudreau C 4 Beam plates - $140 (shipping included)
complete 95 Secondary Actuators, mounting brackets, linkages (51K miles, removed secondary system) $225
2 Secondary Actuators $100
95 Bilstein FX3 shocks with Actuators and controller box, $950 (some leakage, still good 51K miles)
secondary vacuum hard lines “nylon spiderâ€, $50
95 stock ZR-1 fiberglass springs with mounting hardware, $350 (front and rear)
90-95 starter motor (from 95 used, works fine, 51k miles), $125
PCV coupler hoses, $25 (good shape, replaced with kurt white silicone)
Sway bar end links, $35
Air injector smog pump, $50
Rear package tray, $5
Coolant overflow bottle, $10
Jeal Chip for 93-95 (for headers, ported top end) $125
stock 95 valves w/retainers $250 (13k miles)
stock 95 crank shaft (13k miles, with bearings for inspection) matched pistons w rings/liners/rods $1100 GREAT for stock rebuild, fits 90-95 block
Used ZR1 LT5 spark plugs wires (52k miles, good condition) - $175
stock shifter $50
front calipers $80 for pair
front rotors $60 per pair
radiator $95
93 ZR1 Sawblade rims with RA1 race tires (100 miles), light curbing, good shape - $1100
93 Sawblade rims only $800
C4 89-96 bronze top (good condition) - $350
93-95 390 LPE open loop memcal 505 RWHP, $150
93-95 SGC tuned version of LPE memcal (Jim Smith) $150
93-95 Memcal, (for downloading your tune), $45
stock EGR plumbing, hoses, air pump ducts, ect. best offer
Please email me @ ron_kreigh@hotmail.com (ron_kreigh@hotmail.com) if you have questions or PM me. thanks!!!
http://forums.corvetteforum.com/images/statusicon/user_online.gif
I also have alot of "miscellaneous" underhood plenum vacuum cans and sensors, best offer. prices are flexible, make me an offer!! this stuff has to go to help pay for the racing season. help sponsor the "vettahaulic" ( 1980 BB Alchy race vette)
Bill Boudreau C 4 Beam plates - $140 (shipping included)
complete 95 Secondary Actuators, mounting brackets, linkages (51K miles, removed secondary system) $225
2 Secondary Actuators $100
95 Bilstein FX3 shocks with Actuators and controller box, $950 (some leakage, still good 51K miles)
secondary vacuum hard lines “nylon spiderâ€, $50
95 stock ZR-1 fiberglass springs with mounting hardware, $350 (front and rear)
90-95 starter motor (from 95 used, works fine, 51k miles), $125
PCV coupler hoses, $25 (good shape, replaced with kurt white silicone)
Sway bar end links, $35
Air injector smog pump, $50
Rear package tray, $5
Coolant overflow bottle, $10
Jeal Chip for 93-95 (for headers, ported top end) $125
stock 95 valves w/retainers $250 (13k miles)
stock 95 crank shaft (13k miles, with bearings for inspection) matched pistons w rings/liners/rods $1100 GREAT for stock rebuild, fits 90-95 block
Used ZR1 LT5 spark plugs wires (52k miles, good condition) - $175
stock shifter $50
front calipers $80 for pair
front rotors $60 per pair
radiator $95
93 ZR1 Sawblade rims with RA1 race tires (100 miles), light curbing, good shape - $1100
93 Sawblade rims only $800
C4 89-96 bronze top (good condition) - $350
93-95 390 LPE open loop memcal 505 RWHP, $150
93-95 SGC tuned version of LPE memcal (Jim Smith) $150
93-95 Memcal, (for downloading your tune), $45
stock EGR plumbing, hoses, air pump ducts, ect. best offer
Please email me @ ron_kreigh@hotmail.com (ron_kreigh@hotmail.com) if you have questions or PM me. thanks!!!
http://forums.corvetteforum.com/images/statusicon/user_online.gif