UPDATE: Engine is pulled and secondaries gone!!

[oricale]

So as you know us here at WAZOO land pulled the heart out of my ride,...here is a few pics of before and now,...
http://i917.photobucket.com/albums/ad18/oricale/036.jpg
the WHOLE car looked like this!!!,..

http://i917.photobucket.com/albums/ad18/oricale/035.jpg

http://i917.photobucket.com/albums/ad18/oricale/001.jpg

NOW:

http://i917.photobucket.com/albums/ad18/oricale/054-1.jpg

http://i917.photobucket.com/albums/ad18/oricale/059-2.jpg

SO,..the heads are @ C&C machine in Manassas,...

And I thought since I have ripped the entire system, down to the last screw of the secondaries..I would offer them to the highest bidder !!!
http://i917.photobucket.com/albums/ad18/oricale/025.jpg

Anyway I am ordering a A$$ load of stuff from Haibeck and Jerrys as well as some other sources,...

Here's what were loading into the Z:

Headers
all new gaskets
Haibeck chip(when ready)for the secondary delete
Samco rubbers
new timing chains (primary and secondary)
all tensioners
Heads ported to 36mm
new exhaust
4:10's
ect(too much to list..


Anyway, I thought I would give a few Ideas on a few things:

Secondary butter flies and shafts removal:

uses the right torx bit, they will all come out with enough pressure( i used a electric drill. no problem,

The shafts I used a small flat head screwdriver and popped them out by layin the flat head against the inside of the shaft and used one medium hit with a hammer and they came right out!,...

I will be happy to lay out any information i can just let me know!...

[VetteMed]

Looks like fun! :)

[ZZZZZR1]

Only cow batman!!!!!!!

Now that's a project. :saluting:

:cheers:

David

[Blue Flame Restorations]

Always nice to see this type of thing. Keep the pics coming!!!!

[LGAFF]

Thats either a Black Widow wrinkle finish block or you had a massive amount of oil leaking.

[tccrab]

Thats either a Black Widow wrinkle finish block or you had a massive amount of oil leaking.

Judging by the "After" picture, it was just oil and road grime.

TomC
'Crabs

[rhipsher]

If I had to go that far with my motor I'd seriously consider a 368 build or better.

[Corbusa]

And I thought since I have ripped the entire system, down to the last screw of the secondaries..I would offer them to the highest bidder !!!
If I knew what they were worth or If I'd ever need them, I'd see what I could do..:)
It looks like you're having fun, wish I was there to help..