Flashing sys

[Tyler Townsley]

I had always thought the flashing 'sys' was related to a battery dying. When mine started I pulled it and had it checked and it was ok. I cleaned all the grounds (including the fusable resistors) but still get the flashing 'sys'. Any other things to check.

Tyler

[mike100]

I found out (when I rebuilt my steering column) that if the airbag fuse isn't in place, the sys comes up on the digital readout and the car won't start. I thought it was vats related...but anyways, just one other possible check.

[Hib Halverson]

The IP flashes "SYS" when there are CCM codes set.

In the FSM, in the CCM section are instructions on how to get the IP to display CCM codes.

[GOLDCYLON]

You still might have an internal short in the battery under load. However a recent change to an Aftermarket Radio system can cause the same message.

[VetteMed]

You still might have an internal short in the battery under load. However a recent change to an Aftermarket Radio system can cause the same message.

Typically the stereo issue is only a problem in the manual AC cars, since the automatic climate control LCD readout provides enough load in the circuit that the missing stock radio LCD doesn't upset the CCM.

[Y-me]

I've noticed that it comes on if someone took out a warning light in the info center, or the bulb burned out.

[Tyler Townsley]

I've noticed that it comes on if someone took out a warning light in the info center, or the bulb burned out.

Bingo, I removed the bulb for the shock system since that bulb was always on. Guess I will have to put it back in to check.

Thanks

Tyler

[sammy]

leave the bulb in and just break it .i did it to both my cars when i took out the tire inflation sensors off the wheels