how big are my nuts !

[xxxscimitarxxx]

Ok...so ive got your attention :hello:

Ive ripped out nearly all my brake pipes and replacing all with kuprinol...ok its not stainless but if its good enuf for aston martin then l reckon its good enough and lot easier to thread through from the brake manifold behind the drivers seat (and what s pig that is to work on)

so then l bought a load of imperial fittings thinking....its an american car right....obviously not metric....wrong!

So l know l have to get metric 10mm (3/8) and 12mm (7/16) in lengths for (and l will never get this) 3/16" and 1/4" brake pipe

Q...what is thread pitch (lm not with car and need to order by post)

1mm l think but cant be certain....and knowing my luck if l dont ask l will end up getting wrong thing

Thanks in advance

Dave

[sdycke]

your only choices in that style are 1 and 1.5 mm and it sounds like you guessed correctly!! Best of luck!

[xxxscimitarxxx]

Yep....thanks for that....just wanted to be sure me memory of what l was looking at three months ago wasnt tricking me.....they looked like 1mm pitch so will order up a bunch