View Full Version : WTB: Stage 2 or 3 Cams
pantera1683
11-26-2011, 03:29 PM
PM me if you have a set for sale.
Thanks
GOLDCYLON
11-26-2011, 07:49 PM
Pete might be able to help you out
Pantera,i don't know what your looking for but if you have a set of stock cams i can regrind them.
These will work with any size motor.
Set 1
.236 .425 Intake
.220 .420 Exhaust
20-25HP over stock cams
Set 2
.240 .440 Intake
.224 .420 Exhaust
30-35HP over stock cams
These will have a cammy idle but will drive like a stocker long or short trips and i tested these they work.
You will need new lifters.
I have tested a few sets of cams i discovered we don't need so much exhaust cam, our heads flow very well on the exhaust side.
A friend with 427ci LT5 has .224 exhaust and ran 134+mph
Just for comparison
Stage 2 specs .237 .440 In & Ex
Stage 3 specs .242 .445 In & Ex
If you need more info you can email me petezr1@gmail.com
Pete
pantera1683
01-02-2012, 08:01 PM
Pete,
You say these will require new lifters, are you talking new stock lifters or lifters of a different size?
Pete,
You say these will require new lifters, are you talking new stock lifters or lifters of a different size?
I use the Melling JB-2236 these look just like the stock lifter same dimensions.
Pete
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.