clutch issues

[efnfast]

Howdy folks, new to the site. Bought a 1990 ZR-1 this summer. Black on black with 35,000 miles. My clutch seems to be drifting out with the clutch pedal in. I'm guessing a bad slave or master cylinder. My problems are, 1) I can't find the slave for a 1990, looks like I need to use a 1991. 2) Do I use the stamped or cast slave? 3) I read somewhere, and can't find it again that there were assembly issues with some of them. Any insite would be great. Thanks - Steve

[tccrab]

Howdy and welcome to the Brotherhood!
Here's a link to Dynomites Solution page, the info on master/slave is about halfway down:
http://www.zr1.net/forum/showpost.php?p=88873&postcount=3

First person I'd call is Bill Boudreau, "The ZF Doc", he's the best there is on everything about the ZF and what she needs: (602) 319-6575
His website seems to be down right now, but I'm sure it'll be back up in no time.

TomC
'Crabs

[Gunny]

Another thread to read is HERE (http://www.zr1.net/forum/showthread.php?t=15998)

You might want to contact Jim Jandik at Power Torque Systems (http://www.powertorquesystems.com/)

Parts & help are still available ... it's just knowing who to contact

George

[efnfast]

Many thanks. I'll check these sources. I also see there are some other posts recently of the same nature. Should have read before I posted. Guess I was anxious to say Hi.

[Hammer]

Found these from a seller on ebay. States they are AC Delco.
http://stores.ebay.com/vppartswarehouse/ACDelco-Parts-/_i.html?_nkw=ZR-1&submit=Search&LH_TitleDesc=1&_fsub=407096619&_sid=6688419