FS: Fuel Injectors and Rear Hub/Bearing assemblies

[ammrpm]

I have the following items for sale...

All items are located in Houston, Tx.

1. Full set of 16 used fuel injectors, 8 primary and 8 secondary, from a 93 ZR-1. These were working when they were removed from the car. They would most likely need to be cleaned to work their best.

Asking $225 + shipping +paypal fees

http://i1111.photobucket.com/albums/h468/ammrpm/Parts%20for%20sale/CorvettePartsforSale005.jpg

2. Bearings have been SOLD!

Aaron

[XfireZ51]

Aaron,

Interested in the bearings. I'm assuming they accommodate ABS?

[ammrpm]

XfireZ51 - I assume they will work just fine with ABS. They were bought for a 95 corvette that had ABS as well. I did not put these on that car though, so I am not 100% sure.

[XfireZ51]

XfireZ51 - I assume they will work just fine with ABS. They were bought for a 95 corvette that had ABS as well. I did not put these on that car though, so I am not 100% sure.

Basically the bearings have a "strobe wheel" as part of them so the ABS sensor, attached to the hub, can read it. I'll PM u on them.

[Jagdpanzer]

ABS sensor is seperate on the rear hubs.
It installs on the suspension knuckle and sinses speed from the gear wheel pressed on the axle spindle.

http://i540.photobucket.com/albums/gg333/pwasinger/IMG00035-20090321-1329.jpg

http://i540.photobucket.com/albums/gg333/pwasinger/IMG00037-20090321-1339.jpg

[ammrpm]

Phil - thanks for the pictures and explanation.

[XfireZ51]

Yes, thx Phil.

[ammrpm]

Bearings have been SOLD!