INJECTOR QUESTION

[oricale]

Hello I am preparing to to meet up with some of our Z buddeis to get My girl up and running,..I do have a budget and time so I am posting the question:

*Can I run accel 24lb injectors for the primary/secondary or both?

I like accel and I am also looking int ohetting the MSD coil packs as well...

*should I worry about the secondary injectors??

what if any mods do I need to run the accel #150824 injectors??

thanks again and lets R:dancingock and R:handshak:oll!!!!

Dempsey

[Kevin]

if you're swapping injectors do all 16 now

[carmine]

Just Did Mine Do All 16 Carmine1990ZR-1 #357 Black Gray

[oricale]

OK,....BUT will the accel part #150824 work for both primary and secondary???:pray

[ZZZZZR1]

OK,....BUT will the accel part #150824 work for both primary and secondary???:pray

Have to shave off the "nub" off one of the sets (I think the secondaries... When we install them, it's easy to tell).

They will work :cheers:

Might be tough to get them by Wednesday (for a thursday install)

David

[oricale]

Dave,...THATS the best part!!!!...I can get them anytime,..I have a big speed shop right by the base!!!!:icon_thum

[1990 quasar blue]

The correct accel part # is 150121. 21Lbs/hr. I forget if its the primaries or the secondaries but you must trim the pig tail lock with a razor on one of them.its not a big deal but I don't think its necessary with the fic's.

[Paul Workman]

OK,....BUT will the accel part #150824 work for both primary and secondary???:pray

NO, actually...

The part number you want is (Summit) 150821, both primary and secondaries. And, the is a little tab tha has to be ground off - a Dremel makes short work of that.

HTH

P.

[oricale]

After much conferring with my Z brethren Im going with FIC's....keep you posted!!!:cheers:

[ZR1Vette]

FIC is a 100% best choice for injectors...you will get what you need and without the modification required of Accel's

[Hammer]

FIC is a 100% best choice for injectors...you will get what you need and without the modification required of Accel's

I would concur. I have run them over 2 years now with no problems. Drove the car to BG Anniversary gathering from Idaho and averaged 26 or 27 MPG. Just passed Idaho emissions testing with flying colors too.

[oricale]

Cool....hey I built part of your best buy in nampa!

[Hammer]

Cool....hey I built part of your best buy in nampa!

Man, were you ever a long way from home. Wish I'd known, we could have hooked up.

[oricale]

Man, were you ever a long way from home. Wish I'd known, we could have hooked up.

Yeah that was a while ago!!! Like 5 years..27 MPG ??...awesome!...

[carmine]

Did Mine August RC Injectors Very Pleased Runs Great Discount To ZR-1 Members And Jerry`s Gasket Great Also Carmine 1990 ZR-1 #357 Black Gray

[Pete]

Why would you wanna go with 24lbs
If you put the 24lbs injectors you'll have to reburn the chip and might not pass emmisions.

Just go with the 21lbs and you won't have to worry about changing anything and it's plenty injector for up to 750 hp.

Pete