PDA

View Full Version : Part Identifications


Chappy
10-16-2011, 11:53 PM
I picked up a few ZR1 parts a while back, in the box were a couple of parts I can't identify, can anyone help?

https://blufiles.storage.live.com/y1pCKUUFXtHKuAxIe0J66Rk5ETHcXxi9rQZivjkISwIJDrx5fN OeVpDO9C0O4S22UJtQ-TpxHmMqqR64ABtfQOLPg/IMG_2456.jpg

This looks to be an oil pump driveshaft, but I didn't think LT5s had a normal shaft like this. Maybe a distributor drive?

https://blufiles.storage.live.com/y1p52Z75B-ZFsF6UmGURq5jzU62wpxIbN4_PM9kflQK42N0UpoE3BTECm2x3 5WMQ3Hh15PuoZM4B3BPVVMoeMh5CA/IMG_2479.jpg

Obviously it is a pedal for either the clutch or brake, I just don't know which. Any ideas?

I also got a rear brembo brake kit, anyone know who might have made it or any information on it? It has a parking brake included in the hub, so it definitely isn't a normal C4 kit.

https://blufiles.storage.live.com/y1pBmixgpKjJOUWj8WW4kOONr_0YxiEyIQNYUu35sFu39echnJ GFLHsyMT3Sj5f_7p1O1fzNcTB0OPY-Wwl1HYTQA/IMG_2516.jpg

https://blufiles.storage.live.com/y1pHtJlOQUEZtHnb6PPzAdsTSKfDcpUSNs1HdIvkkbPJwPGlXN j6cQWXuDCVlAUOgnnWmKF933aoVGlGXcbN_jRXg/IMG_2517.jpg

https://blufiles.storage.live.com/y1pn0OSq0asm33urOjJa8bhmipbA8EIGjD3L-QwquV4U8b4n16EIhikeDMfgNL2rZf75lKfjkrNqLGx_8elPGTt fg/IMG_2518.jpg

Thanks in advance!

GOLDCYLON
10-17-2011, 12:54 AM
Looks like a custom kit allowing the parking brake to be retained however using Brembo calipers

A1990
10-17-2011, 12:36 PM
I agree with Daryll

GOLDCYLON
10-17-2011, 12:58 PM
Also for pre-90 MY cars prob 86-89. Not ZR-1 specific unless its a mule ZR-1 narrow body etc

-=Jeff=-
10-17-2011, 01:44 PM
Also for pre-90 MY cars prob 86-89. Not ZR-1 specific unless its a mule ZR-1 narrow body etc
no, 89 is same as 90

That pedal is a clutch pedal

Chappy
10-17-2011, 09:48 PM
Thanks guys, appreciate the help. Didn't realize there was a change in parking brake between years on C4s.

VetteVet
10-17-2011, 09:50 PM
I agree with Jeff on the parking brake setup. Not custom, just 88 and prior C4 setup.

The shaft is an oil pump drive shaft from a Chevy Pushrod V engine. Could be V-6 or small block V8 or big block V8.

Jep

VetteVet
10-17-2011, 09:51 PM
Sorry, Make that 87 and prior. My Bad!!!

gbrtng
10-20-2011, 12:02 PM
The clutch pedal might be from a certain twin-turbo ZR-1 that was converted to an automatic. Just guessing.

Bob Eyres
10-20-2011, 12:08 PM
There was also a non- turbo ZR-1 in your Indy area converted to Automatic.