View Full Version : DENSO IT22 PLUG GAP??
95ZR1#418
03-08-2006, 08:44 PM
Anyone have a recommended gap for these plugs? It seems like anything is game from .035-.050 ?
Thanks....:mrgreen:
Jerry#397
03-09-2006, 11:04 AM
Anyone have a recommended gap for these plugs? It seems like anything is game from .035-.050 ?
Thanks....:mrgreen:
Bob,
Cannot answer the question but, why Denso Plugs vs some other brand?
Thanks,
Jerry
93 #397
95ZR1#418
03-09-2006, 02:27 PM
Bob,
Cannot answer the question but, why Denso Plugs vs some other brand?
Thanks,
Jerry
93 #397
Simply, due to following posts on them awhile back from Hib and a number of others, those posts sold me. This plug is about 1 step colder though, my decision was between it and the next warmer, no matter it should be fine for my application. :thumbsup:
40th#381
03-09-2006, 09:10 PM
I have the IT 22's gapped @ .050 No problems.
Jan
95ZR1#418
03-10-2006, 07:58 PM
I have the IT 22's gapped @ .050 No problems.
Jan
Thanks Jan, I'm sure that will work for me. :mrgreen:
Locobob
03-13-2006, 02:43 AM
If I recall correctly mine came pre-gapped at around .045 and I left them like that. Stock for 91 was .035 and the later cars used .050 so I figured .045 would work fine. Be careful if you decide to mess with the gap Bob, those electrodes are really tiny.
95ZR1#418
03-13-2006, 10:23 PM
If I recall correctly mine came pre-gapped at around .045 and I left them like that. Stock for 91 was .035 and the later cars used .050 so I figured .045 would work fine. Be careful if you decide to mess with the gap Bob, those electrodes are really tiny.
Your right about that... I noticed on the Denso site they recommend not touching the electrode at all and just bend the grounding piece. Hey, I got my time blocked off for the PNW Event this summer, see you then. :mrgreen:
Locobob
03-14-2006, 01:20 AM
Your right about that... I noticed on the Denso site they recommend not touching the electrode at all and just bend the grounding piece. Hey, I got my time blocked off for the PNW Event this summer, see you then. :mrgreen:
Glad to hear you're coming out for the PNW event again, should be better than ever.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.