I need your opinions

[mgbrv8]

Which color powdercoat would you guys use

http://www.eastwood.com/hotcoat-powder-silver-base.html

Or

http://www.eastwood.com/hotcoat-powder-oem-wheel-sparkle-silver.html

Or

http://www.eastwood.com/hotcoat-powder-cast-aluminum.html

Or

http://www.eastwood.com/hotcoat-powder-rrally-wheel-charcoal.html

Dave
thanks guys

[902066]

It might help to know what your painting?

[mgbrv8]

Sorry, good point :thumbsup:, It the intake lower and upper and the valve covers, and throttlebody.

Dave

[Dime]

First one.

[902066]

Out of those 4 choices I would pick the 1st one. But I'm not really wild about any of them. The painted plenums I have seen and liked have been a shade of silver or very light grey, all a little darker than the 1st 3 choices, but a lot lighter than the 4th choice. The silver that Mark Haibeck does I like a lot. None of those 4 seem right to me.

[mgbrv8]

Maybe this will help The argent silver is the first one on the list, Rally Wheel Charcoal is the last one. Also if you all know of another good source for powder feel free to share.

Thanks you Gentlemen

Dave