WTS StainlessWorks Ceramic Coated Headers

[Ccmano]

Headers are SOLD....Thank you 93RubyZ... X-Pipe will be listed again separately ...Well... I got away with it for almost 2 years. Moved to CA and kept the car registered in IL. Have to put the OEM exhaust manifolds and cats back on now.

Headers are in perfect condition, have only been on the car about 3 years and maybe 7K miles. Ceramic Coated and have Maganaflow Highflow Spun cats attached (welded on but can be removed). New, this setup is worth about $1750 if not more.

Price is firm at $850 plus shipping. Add 3% if you want to pay via paypal.
I'm adding the Magnaflow X Pipe and resonator center section for an additional $250...
PIX are now attached and I can send more.

H
:cheers:

http://i249.photobucket.com/albums/gg225/hans_meyer/Corvette/IMG_0293.jpg
http://i249.photobucket.com/albums/gg225/hans_meyer/Corvette/IMG_0292.jpg
http://i249.photobucket.com/albums/gg225/hans_meyer/Corvette/IMGP3021.jpg
http://i249.photobucket.com/albums/gg225/hans_meyer/Corvette/IMGP3024.jpg

[Mr Cool]

I'm interested in these. It appears from the Stainless Works website that these do not have air tubes so I can get rid of the air injection system is that correct?

[Ccmano]

I'm interested in these. It appears from the Stainless Works website that these do not have air tubes so I can get rid of the air injection system is that correct?

Yes, no air tubes. That's one reason they have to come off my car here in CA.
H

[Mr Cool]

Let me know when your ready they'll be shipped to 32408.

[carter200]

Yes, no air tubes. That's one reason they have to come off my car here in CA.
H

Weld on air tubes. That would be alot cheaper.....

[Ccmano]

Weld on air tubes. That would be alot cheaper.....


While true, you're proabably not aquainted with the CA smog nazi's. They look for alot more than that. I still have my original manifolds,cats and other misc. hardware. It's actually easier to put that back on and free.

BTW Carter, any news on the tensioner housing you were working on? The money from this sale could be put to good use.

H
:cheers:

[Ccmano]

Let me know when your ready they'll be shipped to 32408.

OK then Mr Cool... your number one in line. Should have them off by next Sunday.

H
:cheers:

[carter200]

While true, you're proabably not aquainted with the CA smog nazi's. They look for alot more than that. I still have my original manifolds,cats and other misc. hardware. It's actually easier to put that back on and free.

BTW Carter, any news on the tensioner housing you were working on? The money from this sale could be put to good use.

H
:cheers:

I have been a bit busy with death in the family, major surgery on the wife (two of them), and now her father has been given 2 weeks to live.
I quoted one interested party about making the items but was told no. I have been approached just this week about making these and have to send the quote to that person to see what is up.
I'm gonna be doing these but for who is the question. Hang in there as it'll be soon.

[Ccmano]

Pete and I were just talking about this today (Sep 8th).....the difference between IL and CA. But have to ask.......I assume you sold all property in IL....and how did they find out in CA? I assume you maintained drivers license in IL or you have CA drivers license?

I was trying to explain to Pete how bad it is in CA....and how costly for smog check and no fun at all modifying the LT5 in CA.

Whatever anyone has in mind....if you come to CA...maintain your residence some other place for lots of reasons :cheers:

Thanks.


I still own the place in IL (rented out) couldn't sell it if I wanted to, but the mistake I made was to get a CA drivers license. Of course you need that for other things. So I've been paranoid everytime I drive the thing. Then I got to talking to my very cool CHP sargent next door neighbor the other day. He filled me in on what would happen if I was stopped. Not a good thing!

So I decided to bite the bullet and change the car back. Good thing I kept the stuff I removed. It actually serves a secondary purpose for me in wanting the quiet the car down somewhat. I must be getting old or something but a little quieter would make the car better for all around driving. Albeit a little slower. Oh well...

H
:cheers:

[93RubyZ]

Have the headers been sold? :cheers:

[Ccmano]

Have the headers been sold? :cheers:

Technically yes... but I can put you down as #2 if the deal falls though.

Just got them out of the car yesterday. We should know shortly.

H
:cheers:

[Mr Cool]

Well my computer just died so when you get the total price figured about give me a little time to get back to you. I'll pm my email address if you have pictures you could send before you box things up.

[Ccmano]

Well my computer just died so when you get the total price figured about give me a little time to get back to you. I'll pm my email address if you have pictures you could send before you box things up.

PIX and Shipping quote sent to the email address you provided.
H
:cheers:

[Ccmano]

Have the headers been sold? :cheers:

Deal fell through so it looks like your up...

The center Magnaflow X Pipe and Resonator are available too... $250

Here are some pictures..

http://i249.photobucket.com/albums/gg225/hans_meyer/Corvette/IMG_0293.jpg
http://i249.photobucket.com/albums/gg225/hans_meyer/Corvette/IMG_0292.jpg
http://i249.photobucket.com/albums/gg225/hans_meyer/Corvette/IMGP3021.jpg
http://i249.photobucket.com/albums/gg225/hans_meyer/Corvette/IMGP3024.jpg

[mike100]

tempting...

[PhillipsLT5]

93 RubyZ, great choice, no stinkin emissions in AZ

[Ccmano]

tempting...

and.... we're very close so no shipping charge. I'm in Corona.

I have to wait for "93RubyZ", he has dibs.

H

[GOLDCYLON]

How are these not sold yet? TTT

[GOLDCYLON]

Have the headers been sold? :cheers:


Do it!!!!!;)

[tf95ZR1]

Interesting. Both an X pipe AND a resonator.
Must be pretty quiet.

[XfireZ51]

Interesting. Both an X pipe AND a resonator.
Must be pretty quiet.

I have this setup. Watson headers and the MF Xpipe w resonator. It works very well, has a deep mellow sound and very little to no drone at ~ 1600rpm.

[sammy]

is the x pipe and resonator 3 in or does it neck down to 21/2 in at the resonator?

[XfireZ51]

is the x pipe and resonator 3 in or does it neck down to 21/2 in at the resonator?

It does neck down at resonator. Paul W did a fairly extensive measurement of MF resonator. However, this is the setup I used both to run 118+ trap speeds and dyno ~400rwhp. I'm planning on dyno tune on the 14th again with same setup. We'll see. The Corsa setup is smaller than the MF system and Haineck thinks the Corsa doesn't restrict.
I'll keep u posted.

[Ccmano]

Headers are SOLD....Thank you 93RubyZ... X-Pipe will be listed again separately ...
H