WMD for Saturday / Sunday August 20 and 21st

[ZZZZZR1]

A big weekend of WMD Saturday August 20 and Sunday August 21st.

Saturday is Injector Replacement for 2 new members...

Rick and his 1990 Black / Black

Bert and his 1991 Steel Blue / Blue

Starts early @ 8:30am for both cars.

After we will have some misc fixings

Sunday is Flywheel replacement for Dave M's car (another new member)

Work will start about 9am. (Darrin your expertise is needed!)


Any other needs, post up asap!

:cheers:

David

[RICKYRJ1]

I need some FPC"s installed as well as some JAG gears (3.73's) Will this service be provided on SAt or Sun.?

[Jagdpanzer]

Ricky,
It will take good part of a day on the lift to do the gear change.
Arrange the day with Jim and I'll bring the tools and parts.
This will make a great HotB article.

[ZR-1nce removed]

We should think about starting earlier than 09:00, I have to go to work that afternoon.

[ZZZZZR1]

We should think about starting earlier than 09:00, I have to go to work that afternoon.

Darrin,

Dave is bringing his car there @ 8am (too cool down) and we can start when you are ready. :)


David

[ZR-1nce removed]

The "Transmission Lift" will be there at 08:00. I will also stop by when I get off work Saturday afternoon to help with whatever is left.

[ZZZZZR1]

The "Transmission Lift" will be there at 08:00. I will also stop by when I get off work Saturday afternoon to help with whatever is left.

There could be a header install or a overheating Z Saturday.... (sure your not working that day?) :mrgreen:


David

[Y-me]

Whats the address?

[RICKYRJ1]

Ricky,
It will take good part of a day on the lift to do the gear change.
Arrange the day with Jim and I'll bring the tools and parts.
This will make a great HotB article.

Thanks, sounds great will do. Hey Capt, you listening? I'll supply the micro fiber gloves for all that helps with working on my car ;)

[RICKYRJ1]

We should think about starting earlier than 09:00, I have to go to work that afternoon.

Aren't you a poor ole farmer?

[ZR-1nce removed]

Aren't you a poor ole farmer?

Yep, but I do occasionally actually have to go to work.

[ZR1Vette]

You guys are killing me... again flying down to Cayman Islands on Aug 20... since I can not attend (as in previous WAZOO gatherings) PLEASE take pics and post...:cheers:

[Paul in VA]

I'll be there... hopefully my overheat issue will be gone...

[RICKYRJ1]

LOOKS LIKE WE WILL BE PUTTING IN SOME 3.73 VIPER GEARS IN MY CAR THANKS TO DR.PHIL ON THE 21ST.

[secondchance]

LOOKS LIKE WE WILL BE PUTTING IN SOME 3.73 VIPER GEARS IN MY CAR THANKS TO DR.PHIL ON THE 21ST.

Any relation to the Dr. Phil on CBS? Yes! Auto whisperer. You ain't seen nothing until you've seen Phil perform a thread in the teeth, hold the header bolt while turning with a box wrench! We are talking "dental dexterity!!!".

[Paul in VA]

Gears is on my bucket list too!

LOOKS LIKE WE WILL BE PUTTING IN SOME 3.73 VIPER GEARS IN MY CAR THANKS TO DR.PHIL ON THE 21ST.

[QB93Z]

OK, I am back from vacation and ready to work on some ZR-1's!!!

WMW (Westminster Maintenance Weekend) will be August 20 and 21.
Location: The garage behind my house at 195 W Main St, Westminster MD
Phone if you need directions: 443-244-1347



Here is the plan:

Saturday: install a set of headers. Start time 8:00 AM (come any time)

Sunday: replace a flywheel and then put 3.73:1 gears in a different car.

So the lift will be tied up but there is space available for other jobs.

We will be working on diagnosing over heating problem on one of my cars (Paul, I hope you make it up so we can compare symptoms) and if we get really organized, I may replace the window motor in the driver's door.

Everyone is invited to come hang out and/or supervise and/or turn a wrench.

Pizza for lunch.

Come see the ZR-1 that went from Nova Scotia to Florida this summer.

Rumour is that we will be documenting the gear change so we will need some photographers and videographers.

Jim

[Scrrem]

Hello from Tampa...wish I could be there guys :( Take good pics on the gear change. See you in Carlisle.
Rich

[secondchance]

Hello from Tampa...wish I could be there guys :( Take good pics on the gear change. See you in Carlisle.
Rich

Wish I was in Tampa - Dale Maubery!

[Paul in VA]

OK, I am back from vacation and ready to work on some ZR-1's!!!

WMW (Westminster Maintenance Weekend) will be August 20 and 21.
Location: The garage behind my house at 195 W Main St, Westminster MD
Phone if you need directions: 443-244-1347



Here is the plan:

Saturday: install a set of headers. Start time 8:00 AM (come any time)

Sunday: replace a flywheel and then put 3.73:1 gears in a different car.

So the lift will be tied up but there is space available for other jobs.

We will be working on diagnosing over heating problem on one of my cars (Paul, I hope you make it up so we can compare symptoms) and if we get really organized, I may replace the window motor in the driver's door.

Everyone is invited to come hang out and/or supervise and/or turn a wrench.

Pizza for lunch.

Come see the ZR-1 that went from Nova Scotia to Florida this summer.

Rumour is that we will be documenting the gear change so we will need some photographers and videographers.

Jim

I'll be there and may bring my son-in-law for some extra help!

[95ZR1#418]

See who ever is there Sunday. Stopping in to say hi, although I haven't had a chance to clean the car, relatively speaking. :mrgreen:

[Y-me]

Well it turns out I have a 24hr shift that day at the Firehouse, plus no one ever gave me the address when I asked for it anyhow.

[A1990]

Well it turns out I have a 24hr shift that day at the Firehouse, plus no one ever gave me the address when I asked for it anyhow.

From Post #17:

WMW (Westminster Maintenance Weekend) will be August 20 and 21.
Location: The garage behind my house at 195 W Main St, Westminster MD
Phone if you need directions: 443-244-1347

[ZZZZZR1]

Should be a big group both day's!

:cheers:

David

[Rex Ruby]

Not going to make this one, see you at Carlisle on Friday :handshak:

[Aurora40]

How'd the first day go?

I went to see a B-17 take off from the local airport... Was pretty cool!

[QB93Z]

Day 1 of the Westminster Maintenance Weekend was a great success. We had 7 ZR-1's attend. I got to meet new WAZOO members Rick and his wife Lynn who are original owners of a 1990 ZR-1. We also enjoyed meeting Dave M. from Pennsylvania who has a 1991 ZR-1 that he bought a year ago.

The header install in Yun's 1994 ZR-1 went well. We spent so much time talking and getting to know one another that we took all day to finish the install. Yun now has headers and a stock 1994 exhaust. The car sounds great. A little deeper tone than stock, and louder but still very civilized. Yun was pleased.

Tomorrow, Sunday, 21 Aug, we plan to put a new clutch and flywheel in Dave M's 1991 ZR-1, put new injectors in Rick's 1990 ZR-1 and then change the rear gear ratio on Ricky from NJ's 1994 ZR-1. Then after lunch......just kidding.

If you are in the area please stop by. Call me if you need directions: 443-244-1347.

Jim

[95ZR1#418]

I think this post will be after the fact, Sundays WMW. Although I live so close & it's killing me not to stop by I just don't think it's going to happen. I ran into "unforseen" problems in wiring the garage today that really set me back, and the electrician is coming first thing Monday morning, I have to get much more done in anticipation of that. What can I say it is the home of '95 #418 and I have so much more to go...

Patti & I talked tonight & decided skip Sunday WMW and do Carlisle (just Sat), we have accommodations for the Setters & we'll find something toward or in Gettysburg (Plan to tour that Sunday) for us. At least I'll have time this week to change oil & charge the AIR.

Anyway, I just got to get more done here. David, lets talk this week so you can fill me in on when/where/how at Carlisle. So, maybe Wed or Thurs evening O.K.? :mrgreen:


I knew if I poked my head out too soon I'd just get in trouble...

[secondchance]

The header install in Yun's 1994 ZR-1 went well. We spent so much time talking and getting to know one another that we took all day to finish the install. Yun now has headers and a stock 1994 exhaust. The car sounds great. A little deeper tone than stock, and louder but still very civilized. Yun was pleased.


Jim

Yun is very, very pleased!!!:dancing She triggered "check engine" light a couple of times driving home but the last 30 min. after restart did not tripthe light - perhaps going through a learing process? Running too lean perhaps? I will have a new reprogrammed chip from Marc soon so we will see.
At crusing speed, 50-85 mph in either 5th or 6th, she is as quiet as factory. Dip into throttle and I get deep, pleasant growl. Also, it was interesting that in 5th dipping into throttle I can feel when the secondaries kick-in. In 1th through 5th, response to throttle improved perceptively.
I am dieing to go back to Jim's today but I am grounded for sure today. I better behave today or I can kiss Cralisle good bye!:-({|=
Thanks to all WAZOO gangfor help, parts run and company.:cheers:

[QB93Z]

I am Glad you are pleased YUN. Hello from David, Rick, Ricky. Phil. David, Scott, Paul.

Jim

[Paul in VA]

I had a great time both days, wish I could have staed later on Sunday. Jim, David, Phil and I installed a RD Racing cross bar on my car (runs between shoulder belt mounts; reduces body flex). Thank You all!

Ironically, I have an actual lead on my car's ocassional no-start problem. On the way home, I stopped at a Sunoco and filled up. Again no start... plenty of juice. I already solved the VATS issue and replaced the battery. Apparently I have a heat soak issue. I push started the car and it ran fine. At least I now have a direction (and old wiring may also relate to the heavy electrical load with the A/C on). I suspect the wires going from the battery/relay have degraded and when the car is hot, no-start problems. This was really hard to figure out as I don't usually make short trips, or if I do, I am not restarting the car right away. I'll do some more testing...

[ZZZZZR1]

Wow rough weekend!

Header install Saturday for Yun....

Flywheel / clutch install that took much longer than expected (leaks and issues, but all resolved) Dana 44 (stock 3.45) upgraded to (3.73) for Ricky. Both were sunday and not finished until after 2am!


Lots of other misc items fixed on 3 other cars. I think the rest of WMD's will be scheduled to allow for potential issues.

Jim thanks for hosting! :Eagle:

Great weekend!

:cheers:

David

[voxdeidave]

To all the WAZOO boys, thanks for all your help!!!!!!
My Z is sooooooooo much quieter at speed and now shifts like budaah! I've really got the itch to do more, now that I've got such a great bunch of guys to back me up. I WILL be back!
Friday for carlise looks questionable for me, but Saturday is carved in stone.......see you then!

Dave

[Jagdpanzer]

Just felt the earth shake. First thought it was Ricky getting after it with his new gears then I turn on the TV and see it was in fact an earth quake.

[QB93Z]

Just felt the earth shake. First thought it was Ricky getting after it with his new gears then I turn on the TV and see it was in fact an earth quake.

I hear you Phil, I thought it was the Blue Turtle stomping around.

A careful inspection of the WAZOO WMD facilities has been completed, everything is OK for the next event.

Jim

[secondchance]

I thought Darrin dropped a ZF6.

[QB93Z]

To all the WAZOO boys, thanks for all your help!!!!!!
My Z is sooooooooo much quieter at speed and now shifts like budaah! I've really got the itch to do more, now that I've got such a great bunch of guys to back me up. I WILL be back!
Friday for carlise looks questionable for me, but Saturday is carved in stone.......see you then!

Dave

Hi Dave, I bet the new U-joints made a lot of the noise difference. I wonder if the loose clutch spring clip was the cause of the noise we heard on Saturday evening as you were driving on to the lift?

Glad we could help.

Jim

[RICKYRJ1]

Can't thank Phil & Jim enough, they stuck it out with installing my gears
till 2:30 am! Phil gave Jim and I a great education on ther install. Phil made sure my car was 200% correct for my 3.5hr trip home. I arrived at Jim's at 10.00am Sunday and got home 6:30 am Monday. I will give a informed report on the gear swap after Carlisle, I was to tired to evaluate them on the drive home. I'm very proud to call these guys my freinds.:handshak:
PS. The Blue Turtle cut out at 5 pm :p

[ZR-1nce removed]

I thought Darrin dropped a ZF6.

tsk,tsk yun. This transmission lift doesn't drop stuff.:cheers:

[95ZR1#418]

Anyone have any thoughts on this hurricane coming & Carlisle? :eek:

[ZZZZZR1]

Anyone have any thoughts on this hurricane coming & Carlisle? :eek:

Non issue with Carlisle. 40% chance of rain Sunday

No worries (need to eye the weather Sunday)