BEST 4:10 Gears Source

[Blue Flame Restorations]

Hi All. Who is the best source for 4:10's???

[tomtom72]

I may be incorrect but as I remember the Viper uses the same dana housing so I would think that a wrecked viper could be a source? Maybe Summitt or Jegs even for a b/n set? Duh....call Marc Haibeck...:o

[ZZZZZR1]

Tom, good ideas!

Check with Phil W... He either has a viper 4:10 set available or he knows where to get them!

:cheers:

David

[Jagdpanzer]

You can get them at this Viper Parts site

https://www.viperpartsofamerica.com/index.php/products/1996-2000-dodge-viper-differential-ring-pinion-set-gear-p5007043

or from your local Mopar parts store under PN P5007043

[HAWAIIZR-1]

I went with Yukon gears, from here: http://www.justdifferentials.com/index.php?main_page=product_info&cPath=31_86_501&products_id=2779


Most go with Dana (Viper); I was on a budget. I don't know what kind of deals right now, but Phil sent me this a few years ago and worth checking if you want Dana which is supposedly the best and strongest:

Here is the MOPAR part number for the 4.10 gear set P5007043 .
Here is an add I received the other day which is good till Jan 11. Just tell Jeromy you are returning customer and maybe he will give you a extra good deal on a set.
You will be very pleased with the difference the 4.10 gears make.
Good luck with your project and happy New Year
Phil
MOPARDISCOUNTPARTS.COM
SPECIAL OFFER
HAPPY NEW YEAR !!!!!!!!!
I JUST WANTED TO SAY THANKS TO ALL OF OUR MANY CUSTOMERS THAT HAVE BOUGHT FROM US THIS YEAR. WE TRULY APPRECIATE YOUR BUSINESS AND HOPE THAT WE HAVE BEEN ABLE TO SAVE YOU SOME MONEY IN THESE HARD TIMES. WE OFFER FACTORY OEM PARTS AT CRAZY LOW PRICES AND FAST FRIENDLY SERVICE.
AS A WAY TO SAY THANKS, WE ARE GOING TO OFFER EVEN MORE SAVINGS. (OFFER GOOD UNTIL 1-11-2009@ 1200 MIDNIGHT)
ANY PART THAT LISTS FOR < $100.00 I WILL SELL FOR $2.00 OVER COST!!
ANY PART THAT LISTS FOR $100.01- $500.00 I WILL SELL FOR $4.00 OVER COST!!
ANY PART THAT LISTS FOR >$500.01 I WILL SELL FOR $6.00 OVER COST!!
PLUS SHIPPING
THIS OFFER IS LIMITED TO ITEMS THAT WILL SHIP BY UPS AND IS ONLY BEING OFFERED TO OUR LOYAL CUSTOMERS. I WILL MANUALLY ADJUST YOUR PARTS PRICES WHEN I INVOICE THEM. MENTION THIS EMAIL WHEN YOU ORDER SO THAT I CAN APPLY YOUR HUGE SAVINGS. IF YOU WANT TO CHECK YOUR PRICES BEFORE ORDERING JUST DROP ME AN EMAIL. BELOW IS A SAMPLE OF SOME OF THE POSSIBLE SAVINGS.

2005 JEEP GRAND CHEROKEE HEADLIGHT LIST CATALOG SPECIAL
$269 $180.23 $164.23

2004 DODGE SPRINTER TURBO $1955.65 $1310.28 $1261.71


2005 DODGE CARAVAN RADIATOR $331.00 $221.77 $202.00

AS YOU CAN SEE THE SAVINGS PILE UP, THIS IS FOR ALL PARTS INCLUDING ACCESSORIES(PLUS SHIPPING) THANKS AND I HOPE YOU HAVE A GREAT YEAR.
SINCERELY, JEROMY (MOPARDISCOUNTPARTS.COM)

[Blue Flame Restorations]

Wow. Thanks, guys. I'll probably stick with DANA. I really appreciate all the input from everyone.

Brett

[FU]

Dana 3:90's Thick.

[-=Jeff=-]

Dana 3:90's Thick.
part number? or suggest site to get them from

[WVZR-1]

part number? or suggest site to get them from

No matter the brand make sure that you buy a gear set for 3/8" ring gear bolts. The later Vipers and the later CMC gear kits are done with 7/16" ring gear bolts.

[WVZR-1]

Dana 3:90's Thick.

Frank,

The 3.90 build I bought from you that was done with the early 44 and a sleeve is doing very well behind a rather large cubic inch SBC in another Corvette. He ruined his gear and I lent him the one I bought from you to establish a tune for his car.

I expected it back in a couple months. Six months later he was still very happy and wanted/decided to buy. I bought a 3.73 for a build but may still do the 3.90. I never had the opportunity to try the one I bought from you!

[Blue Flame Restorations]

Is this 3:90 better than the 4:10? Is it thicker tahn the 4:10? Also, thanks for the tip on the 3/8" vs the 7/16".

[FU]

http://www.tomsdifferentials.com/catalog.asp?pg=34

We have been using Tom's Diff. stuff for quite a while now. As can be seen in the catalog these are also Dana gears.

[Blue Flame Restorations]

http://www.tomsdifferentials.com/catalog.asp?pg=34

We have been using Tom's Diff. stuff for quite a while now. As can be seen in the catalog these are also Dana gears.


Thanks, Frank!

[Jim Nolan]

It is my understanding that the Viper 4:10's are now made in China. Buyer beware.

[FU]

Thanks, Frank!

:handshak:

It is my understanding that the Viper 4:10's are now made in China. Buyer beware.

This is one of the many reasons to call Tom. Also his U joints are the old style 1350's. He sell's no junk. Buy there with confidence.

[vetteman1969]

WHAT WILL YOU DO WITH THE ORIGINAL REAR END GEARS ??