Crying Uncle License Bezel Attachment

[Blue Flame Restorations]

Ok, I've put many a car together but I'm a little stumped.

QUESTION???

How does the rear license bezel attach and which end is the top and which is the bottom. One edge has a 90 degree lip and the other does not. Which goes on top?

Laughing at myslef for having to ask for help on such a simple piece. :confused:

[GOLDCYLON]

Top is the open edge so the license plate slides in. Or should I say drops in

[Blue Flame Restorations]

Thanks!

What attaches the bezel to the bumper????

[Kevin]

the plate bolts if i remember correctly

[Z51JEFF]

If you look at the bumper picture posted in the Looking For A Plate Holder thread you can see the area where the plate screws screw into the bumper.There are 4 bosses molded in the bumper where the screws thread into the bumper.Now,this is on a production car,I dont know if the bumper you have is a proto part or a production part.In the above picture,see the silver bracket jobbers?The center of these is where the screws go.I have the part number for these screws if anybody needs it,just got to find it.

[GOLDCYLON]

Yep as Jeff has stated there are 4 bosses in the rear bumper where the license plates bolts go through

http://www.zr1.net/forum/attachment.php?attachmentid=1264&d=1303169615

[Blue Flame Restorations]

OK. Now I know why I couldn't figure it out. The UK license plate that I have does not have mounting holes in it. Looks like I'll have to do some engineering..... Pic attached.

http://i53.tinypic.com/2n6g66f.jpg