64mm -69mm throttle body for sale

[BOB HDZ]

seeing if there any interest out there for these? been having them made for a while now! picture is 69 mm

[pantera1683]

any benefits on a stock or lightly modified engine?

[USAFPILOT]

Is it for sale?

[Polo-1]

Whats the back side look like.... I know mine was thin on the aluminum.

[BOB HDZ]

yes it depends on what you do? header & chip throttle body i think you would be very happy with! and it would have to send me yours! short turn around time 10 14 days less the closer you live to chicago il

[BOB HDZ]

i don't think i took picture of the back? but the 69 was thin!

[carter200]

How much $$$?

[BOB HDZ]

$300.00 64mm $700.00 69mm

[GOLDCYLON]

$300 for the TB or $300 for the widening service?

[Scrrem]

yes it depends on what you do? header & chip throttle body i think you would be very happy with! and it would have to send me yours! short turn around time 10 14 days less the closer you live to chicago il

This is a dumb question, but I'm new to all this plenum porting stuff. If you enlarge the thottle body bore, don't you have to enlarge the plenum openings where the throttle body mounts up to?
Rich

[LGAFF]

yes you have to match it, although when they came out many of the porters did not match them at all

[LGAFF]

$300 for the TB or $300 for the widening service?



$300 is to open up yours

[BOB HDZ]

the work is done on yours throttle body!!! i don't know if i agree with lee! it all about cfm i don't think it matters were you get it from just how much !!! it all add up!!

[LGAFF]

Bob you would still need to match the area where the TB and Plenum meet or you would have 64MM running into a ridge from the 59MM opening in the plenum.

The price is pretty cheap....and quality is really good

[BOB HDZ]

your right! i thought you meant the bottom of the plenum

[GOLDCYLON]

$300.00 64mm $700.00 69mm


Bob do you have a 64MM ready to go? DO you have some front and back side pics?

[carter200]

Bob do you have a 64MM ready to go? DO you have some front and back side pics?

We want pics :neutral:

[XfireZ51]

Bob you would still need to match the area where the TB and Plenum meet or you would have 64MM running into a ridge from the 59MM opening in the plenum.

The price is pretty cheap....and quality is really good

Lee and I did that when we first did the plen
port. What's the point of 63mm TB if right behind it is a 58mm plenum opening.
Mine is matched

[phrogs]

I have a perfect throttle dbody for this mod!

$250 and its yours if anyone wants it.

Had some welding done to it in the coolant area because of an idiot who didn't know how to drill out a stuck bolt.

It will need some work but would be perfect for someone who has a coolant bypass as well.

photos upon request.

[BOB HDZ]

i have more pic i will look tomorrow

[GOLDCYLON]

hmm my plenium is already ported I need to ask locobob what he ported it to

[GOLDCYLON]

Lee and I did that when we first did the plen
port. What's the point of 63mm TB if right behind it is a 58mm plenum opening.
Mine is matched


Im thinking about sending your old TB Dom its sitting in the garage. Which car was it off of?

[BOB HDZ]

still trying to get pics

[BOB HDZ]

can not find any more pictures of the throttle body.have done many of these. the guy doing them for me does Harley Davidson throttle body all the time.