Crankshaft Position Sensor

[Scrrem]

I am getting a slow seeping leak starting from my crankshaft position sensor. Is there an O-ring or gasket that can be replaced, any concerns when removing / re-installing?
Thanks
Rich

[ittlfly]

Here ya go.... I just did the job.

http://www.zr1.net/forum/showthread.php?t=14095

-and-

http://forums.*************.com/c4-zr-1-discussion/2786818-cam-positioning-sensor-removal.html

I got the O ring at NAPA (as suggested by LGAFF) in a A/C O ring kit. So far it is working just fine. If you need the exact specs for the O ring, drop me a PM as I got them from Jerrys Gaskets if you need them. Jerry doesn't carry them.
(The second URL is on the CF forum)

[Scrrem]

This is the sensor that's leaking....this is the crankshaft position sensor...right?

[ittlfly]

That picture doesn't look like mine. Crank sensor is on the passenger side, cam positioning sensor is on the drivers side. The cam sensor has flat bottom. That picture really isn't showing that. If that's the dip stick just to the left of the sensor, its the crank sensor you are dealing with.

[Aurora40]

Rich, that is exactly what the crank sensor looks like, according to the Fuel and Emissions training guide.