Cam Positioning Sensor

[ittlfly]

I have a oil leak that appears to be coming from the area around the the sensor. Are there any tricks or tips in in replacing the gasket / O ring? And where can that gasket be bought?

thanks in advance.

[tccrab]

It looks like a standard Viton 'O' ring, pull out the old sensor and take it down to the local Napa or Kragen.
Make sure to get Viton, I don't think BunaN would handle the oil and the heat.
Here's a pic of the sensor, I pirated it off of Jerry's website:
http://i71.photobucket.com/albums/i159/tccrab/10096172-U.jpg

TomC
'Crabs

[LGAFF]

I bought a GM AC seal kit with o-rings from NAPA and one worked perfectly....can't remember which one, the oring must the perfect size or it will not fit. These were the green o-rings

[ittlfly]

Thanks Tom.. I got an email from Jerry and he gave me the size for the ''O'' ring. He mentions the "Buna-N size: AS558-017. So what do you think here?

[LGAFF]

NAPA 801207 had one that worked for me

$3.99

That was pre-Jerry

[tccrab]

Steve:

If Jerry says Buna-N will work then it will work.
Seems to be a standard size, 11/16 x 1/16, any parts store should have 'em.

TomC

[ittlfly]

Thanks guys. What I know about Viton or Buna-N ...it's all Greek to me. When you don't know about something surround yourself with people who do. I appreciate the help.