Cam cover vent material

[XfireZ51]

Getting ready to put cam covers on. What material do you use for the vent tubes. It looks to be a "scotch-brite" material.

[A26B]

https://www.jerrysgaskets.com/filter-cam-cover-vent-set-2-90-95-1b4/

https://cdn10.bigcommerce.com/s-nkg90o/products/233/images/1654/10135879__09065.1647459480.1280.1280.jpg?c=2

[VetteMed]

I used scotch-brite, the green stuff. Folded it up on itself a few times and secured with the stock wire.

[ZR1@gmx.com]

I have some that is about an inch thick, from a floor buffer If any one wants some shoot me your address and I will send you some to cut and use,

I have White, green, red and black. The order is fine to course.

ZR1@gmx.com

[flyin ryan]

Layer the Scotch-brite & pack in as much as you can. Will breath fine & will help keep oil in the engine.

[A26B]

UPDATE:
Our preferred mist extraction filter.

https://www.jerrysgaskets.com/filter-cam-cover-vent-set-2-90-95-1b4/
http://jerrysgaskets.com/store2/root/images/10135879.jpg

[PhillipsLT5]

Jerry just keeps the parts coming & our cars going

[ALZR1]

Getting ready to put cam covers on. What material do you use for the vent tubes. It looks to be a "scotch-brite" material.


I use copper brillo/scubber material you can pick it up anywhere,pack as much as you can.


Al.

[XfireZ51]

All,

This is an old thread. Ultimately I replaced the Scotchbrite I originally installed w foam material from Marc Haibeck. Even replacing it in one cam cover was enough to eliminate a persistent oil leak I had when winding the motor beyond 5K.

[Dynomite]

All,

This is an old thread. Ultimately I replaced the Scotchbrite I originally installed w foam material from Marc Haibeck. Even replacing it in one cam cover was enough to eliminate a persistent oil leak I had when winding the motor beyond 5K.
I second the motion ;)

Haibeck Cam Cover Filters (http://www.zr1specialist.com/HAT%20Web/products/cam%20cover%20filter.htm)