LT-5 Training Videos/Tech Guides Cheap

[LGAFF]

Offering these on CD/DVD for $45 shipped.....these guides combined would be arond $375 plus shipping to buy on your own.

Even if you don't work on your car, interesting reading on how it all works...these take time to put together so I need a few days to get them out....taking orders now.

550+ Pages and 2 hrs of videos with labeled/Graphics CDs

1)CPT DVDs (2hrs)-Show how engine is serviced-$200 new
2)Intro to LT5 Manual-goes to CPT video-$25
3)LT-5 Mech Manual-goes with CPT video-$25
4)RPO LT5 Supplement manual (red book)-$25
5)CCM Manual-$25
6)86 ABS Guide-$25
7)LT-5 Fuel and Emissions Guide-$25
8)1991 ABS Guide-$25

[LGAFF]

Was surprised the fuel and emissions guide is really a great source of info and written so most can understand......here is what you get on CD/DVD for the $45


http://i134.photobucket.com/albums/q115/lgaff/029.jpg

[xlr8nflorida]

Good deal, I sold the fuel books for 25 shipped but they are tough to find and when you do they are usually 50.

[LGAFF]

Will Ship to Europe also....

[KGV]

Will Ship to Europe also....

Count me in! Let me know where to send the payment.

Thanks,

Ken
Germany

[LGAFF]

Ken,

Probably stuck my foot in my mouth, when I said I will ship tp Europe, I meant for actual shipping cost......if you are buying based upon the understanding that I would do Europe for $45 I will honor the price.

Shipping is $13 to Europe, I will do $55 shipped to Europe.

Paypal is leegaffigan@yahoo.com

[KGV]

Hi,

I had not even thought about shipping, so 55 is OK with me.

Thanks again,

Ken

[KGV]

Hi,

I just used paypal to send the 55 USD.

Thanks,

Ken

[LGAFF]

Ken due to the misunderstanding, throwing in a free copy of the magazine articles...thanks

[LGAFF]

If anyone needs 91-95 repro cam cover emblems for 91-95 will mail to Europe for actual shipping cost...emblems are $38 a pair.

[LGAFF]

If you bought the Tech Guide for $15 from me before, PM me for a special deal.

[LGAFF]

Final Product:
http://i134.photobucket.com/albums/q115/lgaff/030.jpg

[LGAFF]

For those that do not know the CPT Video outlines how the LT-5 functions as well as how to remove and assemble the LT-5; cam timing process, 2ndry assembly and more. The CPT video also has a test and 2 manuals that compliment the video, all of which I have included.

[Demps]

Lee,
I would like a copy of each please. On vacation and will send payment when I return.
Thanks,
Ted

[DDSLT5]

Offering these on CD/DVD for $45 shipped.....these guides combined would be arond $375 plus shipping to buy on your own.

Even if you don't work on your car, interesting reading on how it all works...these take time to put together so I need a few days to get them out....taking orders now.

550+ Pages and 2 hrs of videos with labeled/Graphics CDs

1)CPT DVDs (2hrs)-Show how engine is serviced-$200 new
2)Intro to LT5 Manual-goes to CPT video-$25
3)LT-5 Mech Manual-goes with CPT video-$25
4)RPO LT5 Supplement manual (red book)-$25
5)CCM Manual-$25
6)86 ABS Guide-$25
7)LT-5 Fuel and Emissions Guide-$25
8)1991 ABS Guide-$25

I would love to have these videos on cd/dvd - where do I send my money?

Awesome job putting this together!

Could I also get a CCM manual? 91 ABS Guide?

Thanks!:handshak:

[Pete]

I would love to have these videos on cd/dvd - where do I send my money?

Awesome job putting this together!

Could I also get a CCM manual? 91 ABS Guide?

Thanks!:handshak:


"What's up Doc"
Been a while,at least since BG.:)

Pete

[LGAFF]

I would love to have these videos on cd/dvd - where do I send my money?

Awesome job putting this together!

Could I also get a CCM manual? 91 ABS Guide?

Thanks!:handshak:


All of guides are included you get the 8 guides and vids for $45 payment can be sent to leegaffigan@yahoo.com via paypal if you want to mail a check or money order PM me

[DDSLT5]

"What's up Doc"
Been a while,at least since BG.:)

Pete


Hey Pete!! How you doing bro? Haven't heard from you in a while either. You still hammering out 10 second runs in the stock bottom ended LT5? What's new with you and your family? Be well my friend - keep pushing the limits of that envelope!:hello:

[DDSLT5]

All of guides are included you get the 8 guides and vids for $45 payment can be sent to leegaffigan@yahoo.com via paypal if you want to mail a check or money order PM me

WOW - what an awesome deal!! I'll send it over via paypal tonight. Do I need a paypal account, or can I use my credit card?

Hey guys - this is a ridiculously great deal on these items - don't miss this opportunity!:handshak:

[LGAFF]

You canlink Paypal to a CC.......if not will send you my address and you can send check or MO

Yep, its cheap and takes some time to put it together, this is really something everyone should have so I am making it affordable. I am selling the 90 nd 92 owners manuals on CD for $17.50 shipped as well.

[Pete]

Hey Pete!! How you doing bro? Haven't heard from you in a while either. You still hammering out 10 second runs in the stock bottom ended LT5? What's new with you and your family? Be well my friend - keep pushing the limits of that envelope!:hello:

Everybody good thanks,Dwight.
Trying to hammer 10's :)
C U @ BG in 4 months:hello:

Pete

[tomtom72]

Okay, $45.00 + $17.50 = $62.50 for the tech stuff and one 90 FSM on DVD, do I have this correct Lee?

I'll do the paypal thing.

:mrgreen:

[DDSLT5]

All of guides are included you get the 8 guides and vids for $45 payment can be sent to leegaffigan@yahoo.com via paypal if you want to mail a check or money order PM me

PM sent - I'll take the guides and vids, and the 90 owner's manual on cd/dvd as well. Thanks bro!

[LGAFF]

PM sent

[RedRiderZR1]

Offering these on CD/DVD for $45 shipped.....these guides combined would be arond $375 plus shipping to buy on your own.

Even if you don't work on your car, interesting reading on how it all works...these take time to put together so I need a few days to get them out....taking orders now.

550+ Pages and 2 hrs of videos with labeled/Graphics CDs

1)CPT DVDs (2hrs)-Show how engine is serviced-$200 new
2)Intro to LT5 Manual-goes to CPT video-$25
3)LT-5 Mech Manual-goes with CPT video-$25
4)RPO LT5 Supplement manual (red book)-$25
5)CCM Manual-$25
6)86 ABS Guide-$25
7)LT-5 Fuel and Emissions Guide-$25
8)1991 ABS Guide-$25

Ok, I have to do this as well. Will send funds by paypal.

Thanks.
Greg

[LGAFF]

Thanks Greg, if anyone else is intereted will be getting more out tomorrow, let me know if you are interested.

Thanks

[DaveK]

Hi Lee

How much shipped to Canada?

Thanks

Dave

[LGAFF]

Lets try $47 to Canada I think its not much more.....

[DaveK]

Thanks. Paypal sent! :)

[LGAFF]

People should be getting theirs over the next few days...let me know what you think!

[todesengel]

Got mine, great info!

Thanks

[LGAFF]

Ken, I ended up sending you a $7 refund.....shipping to Europe was not as bad as I thought.



Europe will be $48.00

Canada is only .30 more so $45 shipped also, $2 refund to Dave K

[DaveK]

Canada is only .30 more so $45 shipped also, $2 refund to Dave K

Lee you should have just bought an extra beer! :cheers:

[xlr8nflorida]

Lee you should have just bought an extra beer! :cheers:


Maybe someone can explain shipping to Canada to me?

When I ship stuff to Canada in the past its like 4X as much.

Am I doing something wrong?

[LGAFF]

I think because the weight of the package is below a certain amount I can send first class, and not priority.

[AT T 2D]

I'm in - just sent payment.

[DaveK]

It probably also depends on the shipper and value of the items. If something is under $50 there's no duty, but if it's over that they start racking up the duty and sometimes 'brokerage' and other ways of ripping us off up here.

I think some companies add that all in to the 'shipping cost' making it look like the shipping is expensive when really it's the duty and fees. Fedex always seems to be really expensive in my experience - regular USPS surface usually seems to be about the best.

Others may have a better idea of how it works though.

[DaveK]

Also picked these up in the mail today - bumper mail day! Thanks Lee, great stuff as always :thumbsup:

[KGV]

Ken, I ended up sending you a $7 refund.....shipping to Europe was not as bad as I thought.



Europe will be $48.00

Canada is only .30 more so $45 shipped also, $2 refund to Dave K

Lee,

Thanks very much, it is great doing business with you! It is nice to know there are still people with such integrity.

Ken

[LGAFF]

Everyone been receiving their videos?

[Paul Workman]

Lee,

I will take a copy!

Tuck one away and l will pick it up @ the next GTG.

P.

[LGAFF]

I have 2 extra sets and going to the post office to mail some out so if you want one let me know. The video shows everything from the engine assembly/pulling the motor to the cam timing process.

[RICKYRJ1]

Got mine Thanks

[LT5-1935]

:cheers: pay pal sent

Thanks

[LGAFF]

On its way today!

[crossfire]

Lee,
I would like a set also. It looks like good reading and I know I'll kick myself in the arse if I pass this up and need one to help with my yet-to-be-acquired C4 ZR-1. Paypal sent. :)

Lance

[LGAFF]

Will get them out as soon as possible, having some snow issues here, may not be until Thursday.....we are getting 12-24"

Thanks!

[crossfire]

Lee,
Would you let me know when you'll be shipping next? Hope all is well with you, there in snow country.

Lance

[LGAFF]

Lance,

Yours was dropped off at the post office on Sat night, I would think it should be there any day now.

Thanks

Lee

[crossfire]

Got mine too! Very pleased.

[LGAFF]

Got an extra set printed off if anyone wants one

$45 shipped.....

[Hoekie]

Hi Lee

Just became a ZR1 owner a few weeks ago and am now trying to get as much info on the TOY as possible considering I live in South Africa.
Is there still any chance of a copy? and if so what would it cost including shipping to South Africa?
Thanks

[ZZZZZR1]

Hi Lee

Just became a ZR1 owner a few weeks ago and am now trying to get as much info on the TOY as possible considering I live in South Africa.
Is there still any chance of a copy? and if so what would it cost including shipping to South Africa?
Thanks


Hi there!

You own a ZR-1 in South Africa? that's great!

Could we get more info?

Where did you get the car and when?

How many miles?

Pictures?

VERY COOL!

Hope to hear from you

:cheers:

David

[RHanselman]

Would love to have one as well... Any left?

[efnfast]

Lee, I'm in if you still have them.

[Hoekie]

Hi David

Yes it has always been a dream to own a Corvette, and have now eventually managed to get one, I was actually looking for a late model C3 but then the ZR1 appeard in a local classifieds site.
I started to do some research and quickly realized it was time to forget about the C3
I then made a deal with the owner to hang on to the car for me to come and look, (nearly 500 miles away)
Well to cut a long story short, I went to look, bought it, and drove it home!!!!!!

It is a Black on black 1990 number 867, with nearly 70k miles on it.
It has got a set of headers fitted, DRM coil over suspension, but for the rest I believe it is stock.
There are quite a few small things to be repaired but that is part of why I call it my "Toy" because I enjoy slowly getting it all sorted out, keeps me out of mischief!!!
Some of the things that need repairing are:

Vacuum pump
O2 sensors
Parking brake lever
Oil leak on the gearbox back seal
PCV system
FX3 system was removed but most of the part are there.
So as you can see nothing really major.

At the moment Im aware of 2 other ZR1's in the country but also only from photo's, one of which is really in stunning condition.

[efnfast]

Very nice Hoekie. Looks like mine, 1990 #1786, black on black. Congrats. I'm also a new owner, but I'll tell you, you have any questions about this car, post them here. These folks will help you with repair advice, where to find parts and just everything about your car. I just ordered headers and people were jumping in telling not to forget this part or that. tons of help.

Again, congrats and enjoy. :cheers:

Steve

[robrtr]

I'd like one too, if there any left.

[LGAFF]

There are I just need to print some labels up

[Hoekie]

Hi

I would really like a copy, can you please give me a cost including the shipping to South Africa area code 4490
Thanks

[LGAFF]

Let me run a few copies off will not be until next week


Lee

[hiperf406]

How much to ship to Alberta Canada ? Thanks lorne

[LGAFF]

Its all the same price

[hiperf406]

You have a Paypal notice. Please send to:

Lorne Doyle
16 2A Fieldstone Dr
Spruce Grove Alberta
T7X 3E7

Thanks. lorne

[Hoekie]

Hi
Are you sure you dont want to check the shipping costs to South Africa?
If you are happy please send me an invoice to my email, I will pay with Paypal
Thank You :)

[ZZZZZR1]

Hi David

Yes it has always been a dream to own a Corvette, and have now eventually managed to get one, I was actually looking for a late model C3 but then the ZR1 appeard in a local classifieds site.
I started to do some research and quickly realized it was time to forget about the C3
I then made a deal with the owner to hang on to the car for me to come and look, (nearly 500 miles away)
Well to cut a long story short, I went to look, bought it, and drove it home!!!!!!

It is a Black on black 1990 number 867, with nearly 70k miles on it.
It has got a set of headers fitted, DRM coil over suspension, but for the rest I believe it is stock.
There are quite a few small things to be repaired but that is part of why I call it my "Toy" because I enjoy slowly getting it all sorted out, keeps me out of mischief!!!
Some of the things that need repairing are:

Vacuum pump
O2 sensors
Parking brake lever
Oil leak on the gearbox back seal
PCV system
FX3 system was removed but most of the part are there.
So as you can see nothing really major.

At the moment Im aware of 2 other ZR1's in the country but also only from photo's, one of which is really in stunning condition.


Wow that's great! The previous owner changed the front bumper to a 1991, all the moldings replaced and 96 front fender wells done too.

I have coil over suspension too and you will enjoy it much more by reactivating FX3..... What a difference!

Do you ever come to the US? If you do, let us know! (a good friend is from SA and working in Dubai. I've been trying to get him to buy a ZR-1 for years)

Love to hear your experiences with your car in SA! What do people say when you open the hood? Are there areas you can really drive your car "all out"?

Thanks for posting up!!! Very cool!

Send me your email address mate!

:cheers:

David

[Hoekie]

Unfortunately I dont see me coming to the US in the near future but I did send you my e mail.
At the moment the car is not mobile as Im busy fixing the items I have mentioned above, but the reaction of my friends when I open the hood is good to see!!!! What *&%##* motor is this??? never seen one like it!!!
My only problem with the repair is that on average it takes 3 weeks for something to get here from the US, so the progress is quite slow, but who actually cares :( The main thing is so far I have managed to get everything I need.
Im hoping to have it on its wheels again in a few weeks as it is also hectic at work.
And then to see if the SMILY switch works again!!!! :-D
There are some area's here where I could give it a good push but my best option is a little light aircraft runway nearby.
Will let you know how things progress.

[robrtr]

Money sent via Paypal. Thanks for making these available.

Ralph

[Hoekie]

Lee money paid via Paypal, thanks again for making some more copies, really appreciated.:dancing

[LGAFF]

Vids and manuals go out tomorrow

[Blue Flame Restorations]

Lee, just sent you Paypal.

[RHanselman]

Lee, just sent you Paypal.

Same...

[LGAFF]

I am up to date on all orders.....you should receive them soon, Ron and Brett you should have yours or will by Monday I would think.

[efnfast]

Lee, I said I'd take one, but never sent a check. I knew there was something pending between us. I'll put a chek in the mail tomorrow. Thanks. Steve

[LGAFF]

Send me your address and I will get it out in the next day or so...

Thanks

Lee

[efnfast]

Lee, PM sent.

Thanks.......Steve

[RHanselman]

I am up to date on all orders.....you should receive them soon, Ron and Brett you should have yours or will by Monday I would think.

Thanks...

Mine arrived and I've already viewed the video's!

Looks like I need to hunt down some LT5 tool kits. Anyone know where to get them these days. I know that BK had them years ago but I'm at a loss now...

Cheers,
RH

[LGAFF]

Most of the stuff you can get by without....tools are $$$ I would say the only essentials off the top of my head are the timing gear tool, and balancer install tool

[Vettevern]

Are these still available?

Vern

[Paul in SC]

Are these still available?

Vern


Ditto on that interest.

Thanks

[LGAFF]

Yes I can make more....

[Paul in SC]

Yes I can make more....


Lee,

PM sent.

Thanks,
Paul

[LGAFF]

If anyone is interested post up, I will make sets and then send you a PM when they are done

[Alberta_ZR1]

I'll take one too. Once you PM I will send PayPal.

[88GTAChuck]

Lee, I'd like a set too. PM me with paypal info.

Thanks,
Charles

[Vettevern]

Send me a PM with Paypal info and I will send money.

Thanks
Vern

[88GTAChuck]

Payment sent. Thanks Lee! You are the Man!!

[Alberta_ZR1]

PayPal sent. Thanks Lee look forward to receiving these items.

[Paul in SC]

Lee,

PM sent.

Thanks,
Paul

[LGAFF]

All are shipped and on the way

[Tripler]

Darn . Did I miss out on this ? I can't remember if I sent a pm or not mr LGAFF .

Could I also get these training programs ?
Thanks
Mike

[LGAFF]

I have one more left, send me a paypal and your address....

for others interested, I can make more

[Fully Vetted]

Hey, Lee. Mine won't play on my laptop. What format did you use?

[LGAFF]

So did they work in the DVD player? I test them on my laptop before sending them out...

[LGAFF]

I used Roxio VHS to DVD to burn them....on a DVD-R from Sony

[LGAFF]

Does the "Title" page show up, you have to click on it....PM me and I will call you, I just threw one in my laptop no issues

[Tripler]

I used Roxio VHS to DVD to burn them....on a DVD-R from Sony



Holy poop !!! You got Roxio to work !!!

I threw my Roxio away last week . No matter what I did , I could not get that program to work . Spent weeks trying to get it to work :mad::mad::mad:You are indeed a genius ;););)

[hiperf406]

Are any more available ?

lorne #1748

[LGAFF]

I will make up some more and PM you

[Fully Vetted]

Does the "Title" page show up, you have to click on it....PM me and I will call you, I just threw one in my laptop no issues



My apologies, Lee. I must not have clicked on it or something. They seem to be working fine now.

[LGAFF]

No problem.....I stand behind them and if anyone breaks one, etc....I will replace them for postage cost.

[Vettevern]

Just got package today. Great videos and guides. Is there a way to view the guides as a single document so you can jump to different pages? My system only allows me the option to bring one page up at a time.

Thanks again

Vern

[Paul in SC]

Vern,

This worked for me. If anyone has a contribution to the question from Vern, please do...


Insert the CD/DVD and open in Window Explorer. When you open the specific folder such as LT-5 Manual in Windows Explorer you can highlight all the pdf files in that folder and right click to save as a combined pdf. Rename the file to be created and follow the prompts. You should save it to your computer, flash drive, etc. rather than back on the CD/DVD.

This will save the entire "book" as a pdf file with access to all pages. From the Table of Contents page, you can see what you want to look at and the corresponding page number. In the tool bar at the top of the window, you can advance to the specific page.

This works for all files that are in one folder and are pdf format.
I did this for both the Manual and Mechanical Guide and it works great. You can also print specific pages from the pdf file as well for reference when working on a specific project.

Thanks to Lee for putting the effort into creating the conversion. It was a lot of work initially. :handshak:

Hope this helps. If you need a walk through drop me a PM and a phone number I can reach you at.

Paul

[Vettevern]

Combining PDF files did not work for me as my Explorer does not have a save option. Are you using Acrobat of some other third part PDF combiner? The web seems to think it won't work just using Explorer.

Vern

[Paul in SC]

Combining PDF files did not work for me as my Explorer does not have a save option. Are you using Acrobat of some other third part PDF combiner? The web seems to think it won't work just using Explorer.

Vern

Vern,

There should be an option in Windows Explorer for combining them into one pdf once you highlight the files.

"Combine supported files in Acrobat..."

I am at work and do not have the CD/DVDs with me. I will check tonight again and catch some screen captures and PM them to you tonight.

It may be your version of Acrobat that will not let you do that. I have Acrobat 9. I will look into this as well.


Paul

[Paul in SC]

Vern,

I have a paid version of Acrobat at work which includes the pdf editor software that allows for the combining of files.

That is the reason you can't do it. Sorry.

Paul

[cvette98pacecar]

Vern,

I have a paid version of Acrobat at work which includes the pdf editor software that allows for the combining of files.

That is the reason you can't do it. Sorry.

Paul

Paul, If you convert the .pdf using OCR you can use the search feature for specific words in the document. Nice function when a document has more than 100 pages.

[chriskinzel]

Is it too late to get a copy? I would one if possible.
Chris

[LGAFF]

Nope I can make more.....I will make some this weekend

[chriskinzel]

I will take a set. Send me your PayPal and I will get $ going your way.
Thanks
Chris

[EWest]

While you are at it, could I grab a set?

Thanks
Erik

[LGAFF]

Sure will post up when they are done

[Tripler]

Got my vids . Friggin awesome ,,, Took the first test and passed . Hey ,,, do you have the test forms ??? just kidding :) :) :)

Thanks


Mike

[LGAFF]

Test forms are in the guides:)

[Tripler]

Test forms are in the guides:)

No way !!! ,,, cool ,,,

Thanks :) :) :)

[LGAFF]

Videos are ready

thanks

Lee

[Secret Squirrel]

Hi Lee,

I'd be interested in a set posted to the UK? :)

Simon

PS. Also noticed at the start of this thread way back when you did cam cover emblems! I suppose I'm way too late for those?

[LGAFF]

What cam cover emblems 90s or 90s and later? I might have some 90s, have to check with Jerry's Gaskets he has the last of my stock.


I will ship to Europe for actual shipping cost.....I am guessing $50


paypal is leegaffigan@yahoo.com

[LGAFF]

http://jerrysgaskets.com/store2/root/index.php?main_page=product_info&cPath=4&products_id=614

[Blue Flame Restorations]

I forgot that I had bought these. I'll have to do a search in the desk. Looks like a few of us have as well.

[LGAFF]

Got your top secret stuff on CD-R also

[Secret Squirrel]

What cam cover emblems 90s or 90s and later? I might have some 90s, have to check with Jerry's Gaskets he has the last of my stock.


I will ship to Europe for actual shipping cost.....I am guessing $50


paypal is leegaffigan@yahoo.com (leegaffigan@yahoo.com)

Thank you, $50 sent via paypal, let me know if works out more!

And thanks also for the link on the emblems its a '91 BTW. :-D

[We Gone]

Thanks Lee,
Came today look great, nice to see they used a 91 Quasar Blue :dancing

[emmvette]

I'd like to buy a set too; looks handy and will hopeful keep me from asking too many questions on the forum!!
I'll shoot the $ via paypal.
Thanks!

[LGAFF]

Got it, will make some up tomorrow....thanks

[LGAFF]

Got it, will make some up tomorrow....thanks

IA guy.....I went to Mt Mercy in CR and parents live in Harlan, IA

[Kevin]

Will you be at carlise?

[emmvette]

IA guy.....I went to Mt Mercy in CR and parents live in Harlan, IA
I've been through Harlan a few times for work. I'm most often in the western half of IA. If your passing through on I-80, let me know; would be great to me you.

[Secret Squirrel]

Arrived save and sound here in the UK, and what a superb source of reference material, thanks Lee. Top man.=D>

[tpepmeie]

Back TTT. Lee, I need one if you have any left.

Todd

[LGAFF]

My computer is down, I don't have any CD labels, but have the CD/DVDs, so if you don't mind white labels....PM me your address.

[LGAFF]

Back in business!

[92whiteZ]

Lee's DVDs are great. thanks again.

[edram454]

Lee, do you have any more of the lt5 training videos and tech guides left? I am new to the registry so I am a little behind. also, i read where you sell repro cam cover emblems for 91-95, what is the difference with the 1990 cam cover emblems?? edramos #3028

I have the assembly manuals in dvd now Do you training videos show things like the plenum being removed etc.. I need to bone up and have the knowledge in case or when my z has a hiccup I can do something about it.

[LGAFF]

I have both available, I can burn a set need to get some labels, these are the GM Tapes; Haibeck sells an under the plenum tape. These cover everything about the engine, timing cams, etc.

For Plenum pulls Marcs is more detailed

[edram454]

Lee,

I would like a copy of the training videos and also 1990 cam cover emblems. I am also in on the purchase of the vinyl letters you are making for the cam covers. If you can give me a price on what you have ( training videos and cam cover emblems) I will pay you. thanks again. ed ramos #3028

I also like the idea of the vinyl letterings red for the numbers, black for the word corvette. I will keep checking to see if you will supply those.

[Halinmontana]

Lee, I would like a copy as well. Let me know how to process payment and I can provide my mailing address.

Hal

[LGAFF]

I will burn a few and send a note when done

Thanks

[Sjeffr1]

Are these still available?

[LGAFF]

yes, I can make some up...on the road this week, will be in touch soon

[the_seeker11]

Are these still available on DVD?? If so, how much for the complete set?
:icon_thum
Mike
1991 zr-1
#441

[LGAFF]

$45 Shipped, thanks

[gtcollins@maxnet.co.nz]

Hi are you still doing the cd's I tryed to send you a pm not sure if you got it any can you let us know if you are still doing the cd's Regards Glen

[LGAFF]

PM sent

[BlackZR1]

Lee, I'm interested too.
Just sent you a PM.

[Intruder]

Offering these on CD/DVD for $45 shipped.....these guides combined would be arond $375 plus shipping to buy on your own.

Even if you don't work on your car, interesting reading on how it all works...these take time to put together so I need a few days to get them out....taking orders now.

550+ Pages and 2 hrs of videos with labeled/Graphics CDs

1)CPT DVDs (2hrs)-Show how engine is serviced-$200 new
2)Intro to LT5 Manual-goes to CPT video-$25
3)LT-5 Mech Manual-goes with CPT video-$25
4)RPO LT5 Supplement manual (red book)-$25
5)CCM Manual-$25
6)86 ABS Guide-$25
7)LT-5 Fuel and Emissions Guide-$25
8)1991 ABS Guide-$25

I am interested in purchasing these CDs. Need price and delivery quotation.

Doug Layman
7704 Harvest Hills Ct
Mt Airy, MD 21771
443-610-0465

[RussMcB]

Yeah, me, too, I guess. Sounds like a great deal.

Thanks for offering it. Sending PM now.