18" CCW LM20s

[scholtmj]

Sold.

18x10 fronts, 18x12 rear. Front tires are 295/35-18 F1 Supercar (used C5 Z06 rears). Rear tires are 335/35-18 Goodyear GS Fiorano that are new but date coded 2005. Center caps by Carter.

Price: $2500 + shipping.

http://i486.photobucket.com/albums/rr221/unclescholt/ZR-1%201359/IMG_2285.jpg

http://i486.photobucket.com/albums/rr221/unclescholt/ZR-1%201359/IMG_2283.jpg

http://i486.photobucket.com/albums/rr221/unclescholt/ZR-1%201359/DSC_0659.jpg

http://i486.photobucket.com/albums/rr221/unclescholt/ZR-1%201359/DSC_0660.jpg

http://i486.photobucket.com/albums/rr221/unclescholt/ZR-1%201359/DSC_0664.jpg

[rogerzr1]

Can't find the list price for these wheels. What do you want for them?

[scholtmj]

http://www.ccwheel.com/wheelprofiles-display.php?id=LM20

These style 18" rims are $700 each new at CCW, so I'm asking $2500 + shipping.

[rogerzr1]

http://www.ccwheel.com/wheelprofiles-display.php?id=LM20

These style 18" rims are $700 each new at CCW, so I'm asking $2500 + shipping.

Thanks, don't know how I couldn't didn't find them. Great looking wheels.
Why are you wanting to sell them, if you don't mind me asking?

[scholtmj]

Thanks, don't know how I couldn't didn't find them. Great looking wheels.
Why are you wanting to sell them, if you don't mind me asking?

I'd like to clear big brakes without spacers. My car sits in the weeds on coil overs and moving the front wheels out would cause rubbing on the hood as it did with the old a-mold/brembo combination.

The fronts will clear C5 brakes and should clear willwood's thin 13" kit. I used bear's 14" 6P template and I had interference.

[rogerzr1]

I love these wheels!!! Wish I had the coin for them!

[scholtmj]

Bump

[scholtmj]

Bump, new price.

[GrayZ]

I'd buy em if someone wanted to purchase my Torque Thrust 2's.

I'd sell mine, for 1500.00

[scholtmj]

I took some measurements on the front wheels for brake fitment. The template is a Baer 6P 13.5" kit, the red line is the SSBC 4-piston caliper outline. Looks like the Baer kit will fit and the SSBC is too close to call.

Side note: look how clean the inside of the wheels are :-D

http://i486.photobucket.com/albums/rr221/unclescholt/ZR-1%201359/IMG_2646.jpg

[rogerzr1]

I'd buy em if someone wanted to purchase my Torque Thrust 2's.

I'd sell mine, for 1500.00


Does the $1,500 include the tires?

[Ccmano]

Does the $1,500 include the tires?

Same Question? Thinking about selling my Dymags (not cheap tho..)
H
:cheers:

[scholtmj]

Bump.

[scholtmj]

Bump.

Replaced the used 295/35 Goodyear F1 Supercars with new 275/35 BFG KDW2s.

[Blue Flame Restorations]

Gorgeous wheels. Wish I could buy them but just too much going on right now.

GLWS

[XfireZ51]

scholtmj,

I noticed you mentioned having Brembos and they tended to push the wheel too far outward. I have Brembos on the Black Rose car and have noiced same issue but with ZO6 wheels. What is the issue with the Brembo and the offset? Any ideas? I'm thinking of ditching the Brembos and going with C6Z calipers on the front at least for the same reason.

[scholtmj]

scholtmj,

I noticed you mentioned having Brembos and they tended to push the wheel too far outward. I have Brembos on the Black Rose car and have noiced same issue but with ZO6 wheels. What is the issue with the Brembo and the offset? Any ideas? I'm thinking of ditching the Brembos and going with C6Z calipers on the front at least for the same reason.

The hat on the 2-piece rotor was very thick - much thicker than stock rotors. I'm not sure if this was by design or just what was available at the time the kit was produced, but this is what was responsible for the "pushing."

http://i486.photobucket.com/albums/rr221/unclescholt/IMG_2038.jpg

You can see the rotor hat has it's own hub-center which stuck out farther than the stock wheel hub.

http://i486.photobucket.com/albums/rr221/unclescholt/IMG_2036.jpg
http://i486.photobucket.com/albums/rr221/unclescholt/IMG_2037.jpg

[XfireZ51]

scholtmj,

That's what I had suspected. I called Brembo and was told that there actually never was a brake kit for the C4 officially developed. The Brembo brakes on C4 were put together with "off the shelf" components of what worked. With stock C5 rotors on my previous ZR, the additional wheel offset was hardly noticeable. The Brembos have exaggerated that offset differential. I was also told that it wouldn't be possible to swap "hats" due to the positioning of the rotor relative to the caliper. Its my understanding that you could not swap in a stock C5 rotor in conjunction with the Brembo caliper.