Accel FI part # for set for a 90 LT5?

[Paul Workman]

Trying to run down a set of Accel (sp?) fuel injectors for a 90 LT5 today.

Anyone have the Accel part # handy???

TIA

P.

[phrogs]

http://www.summitracing.com/parts/ACC-150821/

individual part number is 150121

I bought my 16 150121s from a place called atlantic speed and they no longer carry them.

This guy also has some good injectors or so members on the other fourm have praised them.


http://fuelinjectorconnection.com/shop/index.php?_a=viewProd&productId=165


I was actually thinking of getting a set of his and trying them out. they are cheaper than you can find the accels and his are flow matched and have a warranty, thats why I was thinking about them.

I have the accels and I think I have a bad injector again..

[XfireZ51]

When I did my P&P, I decided to swap everything out under the plenum at the same time. So I bought a set of the Accels from Atlantic Speed.
Also replaced coils with MSDs. Did not want to leave anything to chance.

[GOLDCYLON]

I agee with Dom. I went with RCs and OEM coils although. Its just sound advise while the plenums off IMHO

[Hog]

The Accel literature states that all Accel port fuel injectors are flow tested and are within 1.5% of their nominal flow rating.

Has anyone had a set on an injector test bench?

peace
Hog

[Pete]

The Accel literature states that all Accel port fuel injectors are flow tested and are within 1.5% of their nominal flow rating.

Has anyone had a set on an injector test bench?

peace
Hog


I think Mark H has tested them and has found it to be true.

Pete

[Paul Workman]

Thanks for the injector info!

P.

[Hog]

I think Mark H has tested them and has found it to be true.

Pete

Thanks for the info, the last time I used an Accel injector was a set of 32's on a Vortec/TPI 355 I built

peace
Hog