Interior and trim

[Don in VT]

Hi All,

Just wondering if there is a link for information on taking apart the interior bits and pieces ? Things like -- door panels, dash plastic pieces, switches and knobs.

On my 87 it is a breeze to like change out the stereo head, A/C controls and electronic speedo,tach module. I am hoping for something similar for the new dash design.

Thanks,

Don:flag2:

[Hammer]

If you are going to work on the car, please get a service manual. There are lots of things you can work on yourself, but if you don't have a SM you'll have problems.

Case in point, on the passenger door, there is a screw behind the electrical up and down button that must removed to remove the panel. That's in the SM, but you'd never know it was there if you didn't have one.

http://www.helminc.com/helm/Result.asp?session=BC5B7AA02AEB4062A6CC9BF4F8D094A 6&Style=helm&Mfg=GMC&Make=CHV&Model=CVET&Year=1990&Category=1&Keyword=&Module=&selected%5Fmedia=

Welcome aboard folks.

[secondchance]

If you are going to work on the car, please get a service manual. There are lots of things you can work on yourself, but if you don't have a SM you'll have problems.

Case in point, on the passenger door, there is a screw behind the electrical up and down button that must removed to remove the panel. That's in the SM, but you'd never know it was there if you didn't have one.

http://www.helminc.com/helm/Result.asp?session=BC5B7AA02AEB4062A6CC9BF4F8D094A 6&Style=helm&Mfg=GMC&Make=CHV&Model=CVET&Year=1990&Category=1&Keyword=&Module=&selected%5Fmedia=

Welcome aboard folks.

After a total of 15 years of ownership, dare I say I know how to take most apart.
Please feel free to contact me if you have specific task on hand.

[-=Jeff=-]

I too have done my share.. after the Dash swap in my 89 to a 91 I know my way around C4s fairly well