PDA

View Full Version : plugs


Belsy
07-10-2010, 05:53 PM
What is the concensus on best all around plug choice for a '95 ?? I have always liked Bosch but they only show 1 for '95 yet 5 choices for 92 and older. Any thoughts?? Are the plug size & thread the same for all? Anyone tried Denso?? They seem popular.
Any opinions appreciated,
Thanks

secondchance
07-10-2010, 06:44 PM
My 91 originally came with FR2LS (or something similar). This was superceded by platinum tip later (I think).
I tried AC Delco platinum back in 2002 and later found out insulation had cracked on one of the plugs and that's why the car was missing - trashed them.
I ran AC Delco Rapid fire for a while (7 years) but switched to Denso Iridium recently. Both run fine in LT5.

sammy
07-10-2010, 10:06 PM
i use the ngk irridium plugs and love em

sammy
07-11-2010, 02:21 AM
the 90 gap is 35 i believe , what year did they change it to 50 . i run mine at 40. the plugs for the 93 that wasnt a gasket plug came from ngk @50. i wonder if there are any changes to the electronics when they upped the gap????????????

Dynomite
07-11-2010, 03:03 AM
the 90 gap is 35 i believe , what year did they change it to 50 . i run mine at 40. the plugs for the 93 that wasnt a gasket plug came from ngk @50. i wonder if there are any changes to the electronics when they upped the gap????????????

I miss spoke... .043 gap ;)

http://www.ngk.com/results_app.asp?AAIA=1041297

For 91' ZR1......NGK Iridium BKR5EIX
Iridium (http://javascript<b></b>:glos('Iridium','1','1')) IX Plug, 14mm Thread (http://javascript<b></b>:glos('Thread','1','1')) Size, 19mm (3/4") Reach (http://javascript<b></b>:glos('Reach','1','1')), 5/8" (16mm) Hex (http://javascript<b></b>:glos('Hex','1','1')) Size, Gasket Seat (http://javascript<b></b>:glos('Seat','1','1')), Resistor (http://javascript<b></b>:glos('Resistor','1','1')), Solid Terminal (http://javascript<b></b>:glos('Terminal','1','1')) Nut, ISO (http://javascript<b></b>:glos('ISO','1','1')) Length, Projected Tip, Fine Wire (http://javascript<b></b>:glos('Fine%20wire','1','1')) (0.6mm) Iridium (http://javascript<b></b>:glos('Iridium','1','1')) Center Electrode (http://javascript<b></b>:glos('Center%20electrode','1','1')), Tapered Cut (http://javascript<b></b>:glos('Tapered%20cut','1','1')) Ground Electrode (http://javascript<b></b>:glos('Ground%20electrode','1','1')), .043" (1.1mm) Gap, Heat Range (http://javascript<b></b>:charglos('Heat+range')) 5