PDA

View Full Version : Torx Screws...

flyin ryan
06-10-2010, 02:41 PM
Hey guys, Anybody have a pair of the Torx front license plate screws that come with the 'Corvette' filler plate on the front? I think they might be T-15, going from memory...?
Marq21
06-10-2010, 10:33 PM
For what its worth, I recently bought these from Corvette Central or Ecklers - don't remember which. They were under $5 for 4 if I remember correctly.

Troy
flyin ryan
06-11-2010, 11:11 AM
Cool man Thanks. I honestly didn't look there yet, always just throw it out here first :mrgreen:
flyin ryan
06-11-2010, 11:20 AM
Hhmmm...Can't seem to find them:confused:. Wouldn't happen to have a part no: I can search do you?
DaveK
06-11-2010, 11:45 AM
Part #344028 at Corvette Central
flyin ryan
06-14-2010, 12:10 PM
Thanks Dave...Seen them, not 100% correct though :neutral:. I'll keep beating the bushes :o.
flyin ryan
06-27-2010, 01:54 AM
This is what I need if anyone has...
http://i228.photobucket.com/albums/ee142/flyinryan_ZR1/IMG_1843.jpg
tomtom72
06-27-2010, 09:24 AM
I have been looking for those ever since I bought my car. NYS is a two plate state. I must confess that I cheated and used some torx screws that I got from the "Help" display at the parts store as I couldn't locate a GM P/N to try to order them from a dealer. I gave up mostly, as the stuff I bought was like the wheel house panel screws only a smaller thread size. Absolutely no good for the NCRS crowd.

The standard stuff that places like MAM or CC sells are not for our license plate screw bosses, even though they are listed as license plate screws. :(
Aurora40
06-27-2010, 09:50 AM
I have been looking for those ever since I bought my car. NYS is a two plate state.
I believe he's looking for the very small screws that hold in the filler plate, not the larger screws that hold in a license plate.
91vettezr1
06-27-2010, 10:39 AM
u could cut the attached washer off the screw for the rear plate and use it for the front
flyin ryan
06-28-2010, 12:02 AM
u could cut the attached washer off the screw for the rear plate and use it for the frontIt is virtually the same fastener except for the fact it isn't fully threaded due to large 'Flat Floating' washer....It's missing approx. .125" of thread under it's head...Still may work...maybe :neutral:. Thought about this as a last resort, Thanks though :hello:.