PDA

View Full Version : WTB: Rear rim for 1994 ZR-1

FlaVert
05-03-2010, 12:40 PM
I need a driver's side rear rim for a 1994 ZR-1.

Thanks,
Rick L.
GOLDCYLON
05-03-2010, 01:05 PM
Right and left rear are the same. Welcome top the forum
FlaVert
05-03-2010, 02:33 PM
Right and left rear are the same. Welcome top the forum

I was wondering about that. Thanks!
VetteMed
05-03-2010, 05:10 PM
I've got one, it's not OEM, but it's the OEM-styled AFS reproduction with the deep-set lugs. Cosmetically nearly identical to OEM.
FlaVert
05-03-2010, 05:52 PM
I've got one, it's not OEM, but it's the OEM-styled AFS reproduction with the deep-set lugs. Cosmetically nearly identical to OEM.

Thanks, but I want an OEM one.
GOLDCYLON
05-04-2010, 10:11 AM
Singles are HTF and stock wheels in the correct 36MM offset are NLA. Most folks only want to sell as a set. Andrew has a first generation AFS copy for sale. Dont forget the original wheel where made by AFS in Japan, the only difference that you wont see is a stamped JWL on the front of the rim. Otherwise its identical. Just FYI
FlaVert
05-04-2010, 11:32 AM
Singles are HTF and stock wheels in the correct 36MM offset are NLA. Most folks only want to sell as a set. Andrew has a first generation AFS copy for sale. Dont forget the original wheel where made by AFS in Japan, the only difference that you wont see is a stamped JWL on the front of the rim. Otherwise its identical. Just FYI

I had always read that the repos were slightly different. Thanks again for some great info!

Rick L.
GOLDCYLON
05-04-2010, 01:13 PM
I had always read that the repos were slightly different. Thanks again for some great info!

Rick L.

The early gen AFS's are the same. Keep in mind however the seller has one 36MM and one 50MM (GS Offset) rear to sell and not a matching pair
ScottZ95ZR1
05-04-2010, 01:26 PM
The early gen AFS's are the same. Keep in mind however the seller has one 36MM and one 50MM (GS Offset) rear to sell and not a matching pair


Were the early AFS wheels the same weight as OEM ?
FlaVert
05-04-2010, 01:29 PM
The early gen AFS's are the same. Keep in mind however the seller has one 36MM and one 50MM (GS Offset) rear to sell and not a matching pair

GoldCylon, I sent you an e-mail.
GOLDCYLON
05-04-2010, 01:54 PM
Were the early AFS wheels the same weight as OEM ?


No Idea I just know first generation AFS Repops were visually identical. Unsure if the weight remained the same. Suggest getting Full details front and back so a comparison can be made as well
GOLDCYLON
05-04-2010, 01:54 PM
GoldCylon, I sent you an e-mail.

Replied :wink: