Demps
01-01-2010, 08:16 PM
Looking for:
1) the small sheet-metal type screw that holds the aluminum shield to the throttle body. It is the torx head screw on the upper front part of the shield. (same as one that holds throttle cable to plenum) Need three-five.
2) the small nuts that are on the side of the same cover. need four-six.
3) original nuts for the ECM. Need eight-ten.
Thanks,
Ted
1) the small sheet-metal type screw that holds the aluminum shield to the throttle body. It is the torx head screw on the upper front part of the shield. (same as one that holds throttle cable to plenum) Need three-five.
2) the small nuts that are on the side of the same cover. need four-six.
3) original nuts for the ECM. Need eight-ten.
Thanks,
Ted