View Full Version : Mile Shoot Out
PhillipsLT5
12-08-2009, 07:15 PM
http://www.mojavemile.com/
Hammer
12-10-2009, 08:14 AM
I'd really like to go to this event but can't this year as BG is happening for me. I made it to the first Gathering West and the mile event there, but only got one run.
PhillipsLT5
12-17-2009, 11:35 PM
Rules are under revision, wait for latest info
ZRXMAX
01-05-2010, 04:58 AM
Any updates yet ?
PhillipsLT5
01-05-2010, 11:00 AM
Yes, on website now, rules revised
PhillipsLT5
01-05-2010, 09:46 PM
If you are serious, read the rules, you will have a speed limit based on experience, license, safety regs, tires, etc
Any ? you can call them
To give you an idea my car ran 155 at Nellis, Aprox 1500 above sea level, very lightly moded, 4.10 gears, K&N, Haibeck chip, lowered
After Haibeck mods, 410 RWHP, it ran 166.4, close to redline in 5th
A 2008 ZO6 ran 166.5
It is really hard to gain MPH over 120 MPH, fighting wind resistance, as you can see, you need alot of power
This airport is aprox 2200 above sea level and can be windy, maybe that pushes or in your face
This will cost $ for safety regs and fees but NO TICKETS
PhillipsLT5
01-05-2010, 11:11 PM
I have not been to a organized race event and walked away with buyer remorse, so you should make it
Haibeck 500 package, minus alum flywheel stayed with stock and added cats, so I lost 18HP, 482 HP = 410 RWHP
Start spending some $ on safety regs
MKM put on the Nellis event
jonszr1
01-06-2010, 09:00 PM
What does this all mean?
"For any given run, the speed limit in effect will be the lesser of the vehicle's Speed and the competitor's License Speed. Exceeding this limit, i.e. "breaking out" may be cause for penalty or disqualification."
There is also a "Tech speed" limit imposed.
I may get there (Mohave) with my Z and find out I have a speed limit :sign10:
Can I find out my License Speed and my Tech speed before I decide to go?
I may find out I can get a better run on highway 99 or highway 58 on the way over to Mohave than on the runway at Mohave :sign10:
The average speed on highway 99 (group of ten cars) was 90 mph last Thur (Dec 31st) and we were passed by several cars like we were standing still :D
Maybe the 99 we seen on a sign was the speed limit :icon_stud
At Mohave there is a "trap speed" and on highway 99 there is a "speed trap"....the latter will cost you some BIG bucks but it also costs at Mohave. On highway 99 you get your top speed by radar and it will be on your ticket and I would say it is official :-D
That official speeding ticket will be suitable for framing as you like (just like your top speed ticket at Mohave) but the purchase price might be a bit higher :cheers: i could allways take you out to the panament valley. there is a 4 mile sec on the valley floor that from time to time i go out and test things out . the elevation is -200ft . i get there a daylight and the car just flat flies . its state route `120 exactly 1/2 way to death valley . by the way who did your porting ? and did you get a chance to have the car dyno tuned afterwards ?
Dynomite
01-06-2010, 11:07 PM
i could allways take you out to the panament valley. there is a 4 mile sec on the valley floor that from time to time i go out and test things out . the elevation is -200ft . i get there a daylight and the car just flat flies . its state route `120 exactly 1/2 way to death valley . by the way who did your porting ? and did you get a chance to have the car dyno tuned afterwards ?
:cheers: Jeffvette is doing my top end porting.....I have everything in parts on the garage floor at the moment http://www.zr1netregistry.com/forum/showthread.php?t=10790
I do have my SW headers and chambered exhaust installed. I will dyno the Z after I get it back togther which should be pretty soon I think ;)
PhillipsLT5
01-13-2010, 07:10 PM
Rules & Registration is up
Who's in?
PhillipsLT5
01-31-2010, 07:15 PM
Anybody in?
CINCITYZR1
02-08-2010, 10:42 PM
i will be there
i talk to mike border the guy is runing the event and some of the rules are if you have a stock car you can run up to 180 or 190 and if the car is not stock with 5 poit belts yuo can run up to 205
angel
PhillipsLT5
02-10-2010, 12:00 AM
See you there, You bringing the Z
CINCITYZR1
02-10-2010, 11:44 PM
yes i will be bringing the new z
angel :cool:
tf95ZR1
02-11-2010, 04:06 AM
yes i will be bringing the new z
angel :cool:
New Z, Angel? Damn, fess up! Whatcha got?:-D
CINCITYZR1
02-11-2010, 08:11 PM
a 2009 jsb with few mods
angel :cool:
PhillipsLT5
02-11-2010, 11:12 PM
Well you got us beat, Ted you coming?
tf95ZR1
02-21-2010, 02:45 AM
Well you got us beat, Ted you coming?
Now I'm seriously thinking of it. One hang up
it my GS D3's might be too old.
Don't want to have to buy new tires........
Jeffvette
02-21-2010, 03:06 AM
MKM put on the Nellis event
MKM did not do the first two Nellis events. I was present at one they did and not impressed with their operation.
PhillipsLT5
02-21-2010, 09:42 AM
Ted, check the dates, no more than 6 years old, is OK
tf95ZR1
03-04-2010, 10:03 PM
Looks like rain.
weather.com 80%
:mad:
:cry:
:(
tf95ZR1
03-05-2010, 03:46 PM
Now weather.com says afternoon showers 60%
:censored:
:dontknow:
jonszr1
03-05-2010, 09:06 PM
:cheers: Jeffvette is doing my top end porting.....I have everything in parts on the garage floor at the moment http://www.zr1netregistry.com/forum/showthread.php?t=10790
I do have my SW headers and chambered exhaust installed. I will dyno the Z after I get it back togther which should be pretty soon I think ;)
cool jeff does great work. should make some nice power . what type of exhaust did you go with after the headers ?????
tf95ZR1
03-06-2010, 12:31 AM
cool jeff does great work. should make some nice power . what type of exhaust did you go with after the headers ?????
:dontknow:
Dynomite
03-06-2010, 10:02 AM
cool jeff does great work. should make some nice power . what type of exhaust did you go with after the headers ?????
SW ZR1CORVOR Off Road headers and SW ZR1CHAMSW 3" exhaust ;)
tf95ZR1 :drunken_s wants us to keep it short :(
tf95ZR1
03-06-2010, 12:16 PM
Didn't see an earlier post. Didn't know what this had to
do with a mile shoot out in Mojave, CA
Quote:
Originally Posted by Dynomite
Jeffvette is doing my top end porting.....I have everything in parts on the garage floor at the moment http://www.zr1netregistry.com/forum/...ad.php?t=10790
I do have my SW headers and chambered exhaust installed. I will dyno the Z after I get it back togther which should be pretty soon I think
cool jeff does great work. should make some nice power . what type of exhaust did you go with after the headers ?????
tf95ZR1
03-07-2010, 12:55 AM
I really blew it. Thought it was going to be rained out so I didn't go. Sounds like people got in at least 3-4 runs.
flyin ryan
03-07-2010, 02:17 AM
I really blew it. Thought it was going to be rained out so I didn't go. Sounds like people got in at least 3-4 runs.Way to go Ted [-X
PhillipsLT5
03-07-2010, 10:55 AM
I am on the same list, really kicking myself and it hurts
Weather.com got me too
CINCITYZR1
03-10-2010, 09:40 PM
had a good time , run 4 time some of them run 6 time or more
my best run was 180.5 it was a bit windy with ahead wind
the talk is it will be again some time in october and will run the other way onthe runway
angel:cool: =D>
tf95ZR1
03-18-2010, 03:51 AM
Hey Phil!
We are (in)famous! Mojave Mile has posted results on their web site
listing everyone's times. We are listed (way at the bottom) as DNS! I figure
its kinda like DNF. Picture Jr., or Jeff Gordon, or Denny Hamlin crashing at over 200mph and just not finishing.
PhillipsLT5
03-19-2010, 12:30 AM
More salt in the wound after looking at that
I would of been right there with the new ZO6's
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.